The Accurate Reloading Forums
.300 Winchester Magnum - 180 gr. Accubond. Which Powder first?
17 August 2006, 01:27
300winnie.300 Winchester Magnum - 180 gr. Accubond. Which Powder first?
Here are the facts as they stand:<BR><BR>I have a .300 Winchester Magnum that I want to test with 180 grain Accubonds. I have the following powders and quantities available (with the guns I use them for also listed).<BR><BR>My question is which powder would you start with (may not end up with) considering a desired mix of high velocity and accuracy (sub m.o.a., and yes the gun is capable)and taking into consideration such things as temperature stability (I hunt in 85F down to below 0)<BR><BR>Here is what I have:<BR><BR>8 lbs of IMR 4831 - No current use (working on a .270 Winchester load)<BR><BR>5.5 lbs of H1000 - Current use is in a 200 grain Accubond load for the gun in question.<BR><BR>4.5 lbs of RL22 - Current use in in a .257 Weatherby with 100 gr. TSX.<BR><BR>1.5 lbs of IMR 7828 - No current use<BR><BR>1 lb of RL25 - No current useWhat powder would you start with?IMR 4831H1000RL 22RL 25IMR 7828
17 August 2006, 01:40
RickFI didn't vote. IMR4831 may not give the absolute highest velocities, but it should give fine accuracy and is quite fine in different temperatures. Besides, you've got lots of it!
17 August 2006, 07:41
kraky81.0 grains H1000!!!!!!!!!!
17 August 2006, 08:07
molar1I have found that 75.5 gr RL-22 will produce near 3100 fps while delivering sub moa groups
17 August 2006, 08:55
308SakoWork up to 77 or dare I even mention 78 grains of IMR 7828 and velocities and accuracy, as well as low SD's and ES will be yours. Not all rifles will want to handle 78 grains, butif velocity comes with less powder, so be it.
Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
17 August 2006, 09:00
brianboIn my 300WM, H4831sc gives me the best accuracy and is temperature stable. RL22 gives faster velocities but is not temperature stable in my experience. H1000 would be your best choice given the powders available to pick from.
Regards,
Brian
Meet "Beauty" - 66 cal., 417 grn patched roundball over 170 grns FFg = ~1950 fps of pure fun!
"Scotch Whisky is made from barley and the morning dew on angel's nipples." - Warren Ellis
NRA Life Member
18 August 2006, 16:25
chainThe best groups I have ever shot in my 300 win were 80 gr H 1000 and 180 Accubonds. At 81 gr the groups open a bit but it might have been me. Further testing tomorrow.
Windage and elevation, Mrs. Langdon, windage and elevation...
18 August 2006, 17:18
30378I agree with molar 1. I use 75.5gr of RL-22 with Nosler Partitions. It is Elk disaster. Great power and groups.
Free men should not be subjected to permits, paperwork and taxation in order to carry any firearm. NRA Benefactor
18 August 2006, 20:26
buckshotI voted IMR 7828, but some rifles have done better with RL22. 308 Sako is right on with 78 grains of 7828 and 180s. Funny thing tho, the Ruger loves RL22, and the Sendero does even better with 7828.