The Accurate Reloading Forums
Burn Rate Chart (on-line)

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/153103415

23 July 2006, 21:40
N. Garrett
Burn Rate Chart (on-line)
Anyone know of an on-line burn rate chart for the various commercial powders?

I have limited charts in my reloading manuals, but an updated one on-line would be perfect.

Thanks,
Garrett
23 July 2006, 22:07
El Deguello
Try http://stevespages.com/powderrates.html , thanks to Steve Ricciardelli.......


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
24 July 2006, 01:08
Gerard
Burn Rate Chart
24 July 2006, 17:46
Wink
Garrett, you will notice that not everyone's burn rate charts are identical, probably different measuring systems involved. Here's one:

http://www.varminthunter.org/reloadburn.html

I notice that the ADI (Australian Defence Industries) is frequently used a source. The French powder manufacturer's chart shows a few differences in burn rate and in some cases very large differences. Just thought I would let you know that the charts don't necessarily give the information you need to know.


_________________________________

AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.
24 July 2006, 18:28
vapodog
quote:
Originally posted by Gerard:
Burn Rate Chart

This is the best on the net IMO...it allows for powders of equal burn rate to be shown that way and has many more powders than most.

Thanks Gerard for the post.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
24 July 2006, 18:57
onefunzr2
http://www.adi-limited.com/handloaders-guide/equivalents.asp
24 July 2006, 19:32
Wink
Garrett, I agree with Vapodog that the chart posted by Gerard is the one that corresponds closest to my experience between French Vectan Powders and VihtaVuori powders, which are the two I use. If you glance at the ADI table you will see huge differences between the two tables and those two manufacturers powders.


_________________________________

AR, where the hopeless, hysterical hypochondriacs of history become the nattering nabobs of negativisim.