ive got one of them dual ended adjustable primer pocket uniformers. i was just wanding what the correct deapth is for the cutter i never see any info on it. thanks jason

I don`t know for sure what the SAAMI figure is but, my Sinclair cuts large rifle pockets to 0.128". I don`t have a unprimed case handy that takes a small rifle primer to measure. I use a non-adjustable uniformer, I figure there is only one proper depth and the fixed cutter should be at that lenght. Less to worry about being out of wack.

I'd contact K&M, they can give you the correct depth measurements. I believe there are three that you need - small rifle, large rifle, large pistol.