The Accurate Reloading Forums
218 mashburn bee

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/148100473

26 November 2005, 05:15
Hutzpah-
218 mashburn bee
Does anyone have load data for a 218 mashburn bee shooting 40gr 50gr varmint bullets?
I'm now in Western Australia and unable to find any Hodgon lil gun powder.
I can only buy Wincester,Alliant or ADI powders.
What powder do you think is best W296,2400,AR2205 or AR2207?
I read that W296 works well in a Hornet ,K-Hornet but what about the Bee?
Advice much appreciated.

Thanks Hutzpah
26 November 2005, 06:36
308Sako
My best load for an old Kimber of Oregon bee was 13.5 grains of AA1680 or Win 680 with the 45 grain hornet bullets... worked like a charm... accuracy was amazing!






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
26 November 2005, 13:43
ShopCartRacing
Have 2 Martinis done up in 218 mash.

Best combo is the cheap 46gr Winchester Hp and H4227.

I basically use 221 FB data and back off a little bit.

I have tried RL7 with mixed results, but if you haven't tried H4227, you've been missing out.

-Spencer
26 November 2005, 18:38
Hutzpah-
Thanks for the info 308Sako and Shop Cart Racing.
Hutzpah Smiler
26 November 2005, 20:31
craigster
I've had very good results with H110 and RE7. 296 and H110 are very close to each other in burn rate.
26 November 2005, 22:52
ricciardelli
http://stevespages.com/222_1.html


http://stevespages.com