The Accurate Reloading Forums
sizing die question

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/147103074

26 April 2006, 04:25
beretta9289
sizing die question
I think that i am going to get a Lee neck sizer die so that my cases remain fireformed to my chamber. how do i deprime the cases without running them through the FL sizer die? is there a depriming die or something? what's the best way to deprime the cartridges without sizing them at all? my FL sizer came from a 3die set, Lee pacesetters.


Gun control is hitting your target.
26 April 2006, 04:44
RiflemanZ
I use a universal decapping die from rcbs and no lube is required.


*We Band of .338 ers*.NRA Member
26 April 2006, 04:53
onefunzr2
Get the Lee collet neck sizer. It removes the primer. Guaranteed to give more accurate ammo or your money back. Do a search. Many folks on this forum sing the praises of Lee's collet dies. I have one for every rifle caliber I load for except DG caliber 416 Rem Mag and 35 Whelen which is in a pump gun.
26 April 2006, 07:23
woods
quote:
Originally posted by onefunzr2:
Get the Lee collet neck sizer. It removes the primer. Guaranteed to give more accurate ammo or your money back. Do a search. Many folks on this forum sing the praises of Lee's collet dies. I have one for every rifle caliber I load for except DG caliber 416 Rem Mag and 35 Whelen which is in a pump gun.


Ditto thumb


____________________________________
There are those who would misteach us that to stick in a rut is consistency - and a virtue, and that to climb out of the rut is inconsistency - and a vice.
- Mark Twain |

Chinese Proverb: When someone shares something of value with you and you benefit from it, you have a moral obligation to share it with others.

___________________________________
26 April 2006, 21:43
Stonecreek
. . . and there's no lube to mess with, which makes resizing with the Collet die about a jillion times faster and easier.