The Accurate Reloading Forums
H4350 and Swift A-Frame 300gn for .375HH ?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/144100962

20 May 2005, 01:16
Huglu
H4350 and Swift A-Frame 300gn for .375HH ?
Gentlemen,
I am in search for a reasonable load for my zkk602 in .375HH with the use of H4350 and the 300 grain A-Frames. Unfortunately I cannot find any loads for partition bullets on Hodgdons website, can I still use the same loads for a jacketed bullet of the same weight? I have heard that partition bullets give high pressure signs earlier than other jacketed bullets. I will use winchester or norma brass and PMC non toxic primers.
All comments are helpful.

Sincerely
Daniel
20 May 2005, 01:47
McCray
The Swift manual shows from 73.9 to a maximum of 79.5 grains of H4350 under their 300 grain A-Frame.

Hope that helps.


"There always seems to be a big market for making the clear, complex."
20 May 2005, 01:54
Huglu
Thanks!
That would be a good start! Smiler
Does anyone have pressure or velocity for this load?

Sincerely
Daniel