[QUOTE]Originally posted by Doc224/375:
If I may be so bold as to mention after an initial through cleaning , a light coating of ( I use BoeShield T-9 )

as a case lubricant as it's extremely light and leaves a slight wax residue ; even after wiping with a clean

towel . I use vibratory and synthetic media but Walnut hulls or cob works also .

My point is ; Once one gets their brass clean and shiny ,Boeshield retards tarnishing as well as powder

residue and I usually go 4-5 reloads with nothing more than wiping the brass off after reloading procedures .

It isn't jewelry quality , yet it's clean and shiny enough and it last and last with little fussing .

Difference between polishing media I use and Walnut hulls is my media can be cleaned and is faster ;

I don't recommend that on Walnut or cob though !!!


Which equals more trigger time and less reloading time .

Whatever works is my motto ; this seems to have worked really well for myself over the years .




ENOUGH OF THIS BS-----I want mine to shine like a Diamond In A Goats Azz!!

Some more reading for you. http://benchrest.com/showthrea...d50c95b58de101b6e105 I now use only ALL free & clear laundry detergent with water.

HomeBrewer ;Can you still buy Calgon ? Use a tablespoon in your solution an remove those nasty water spots .

I really would eliminate the vinegar and use citrus ( why I suggested the Orange or Lemon peels ) don't need the

juice . Good to go .

quote:

Originally posted by homebrewer:
...My question is why is the well-used stuff so much more clear then the stuff with so few miles on it?

You are not using enough Salt, Battery Acid, Vinegar and Blue Dot. Grab that 50# sack of Salt you blow-harded about in the other thread, mix it in a small kids swimming pool with the Battery Acid, Vinegar and Blue Dot, then dive in to stir it all up.

The very best of luck to you.

The next to hit my Ignore list says,

quote:

Grab that 50# sack of Salt you blow-harded about in the other thread...

I'm afraid you have me at a disadvantage, sir. I have never written about any fifty-pound sack of salt in my entire tenure in these pages. I might be mistaken. Please supply an appropriate reference...

Did someone other than you say that in this thread???

quote:

Originally posted by Hot Core:

Did someone other than you say that in this thread???

Looks like I did say that. And what are my consequences for not remembering? You gonna put up a bunch of emoticons or something? You gonna call me a liar? You gonna have me arrested? Gonna raise my taxes? Send me to Vietnam?