The Accurate Reloading Forums
Powder Scales

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/1141031331

23 May 2010, 19:05
JerryE
Powder Scales
I have a Dillon H66-13480 beam scale that I'm loosing confidence in it's accuracy. Is a Ohaus 10-10 a good scale
23 May 2010, 19:12
Bob from down under
I like 10-10s


Regards,
Bob.
23 May 2010, 20:23
onefunzr2
Ohaus has a long and illustrious history, beginning in 1907 as a scale repair business. First incorporated in 1914 as the Newark Scale Works. They went on to innovate and produce the world's best scales. 1947 saw them incorporate as the Ohaus Scale Corporation.

In 1963, they produced the world's first magnetic dampening mechanism for their reloading products, providing for faster results. In 1973, they sponsored the first SuperShot competition. In 1988, they consolidated all their scale manufacturing under one name: Ohaus.

Do you trust the weight stamped on your packaged meat that you get from your local butcher? They were, almost without exception, weighed upon electronic scales produced by Ohaus. The leader in electronic weighing since 1979.

Go to almost any primary or secondary school, and you will find that the triple beam scales used most often, are made by Ohaus.

Nearly all scales produced for the reloading community, regardless of name, were manufactured (if not designed) by Ohaus.

The 10-10 is no exception.
23 May 2010, 22:21
wasbeeman
Why are you losing confidence in your old scale?


Aim for the exit hole
26 May 2010, 21:54
onefunzr2
quote:
Originally posted by wasbeeman:
Why are you losing confidence in your old scale?


Apparently a one post wonder!
27 May 2010, 03:00
GLShooter
I would just call Dillon and tell them. They will check it and fix/replace as needed.

Greg
14 July 2010, 01:31
JerryE
Ladies & Gents,
Thanks for the comments, As I load in the garage I noticed a black wasp of some type had built a small mud nest on the back side of the beam.
14 July 2010, 02:08
Jim C. <><
Jerry, I bought my Ohaus scale as a Lyman M-5 in mid '65, basically the same tool as the current RCBS 1010. It's as dead on accurate and sensitive today as it was when I pulled out of the box. Actually, I think that's equally true of any beam scale. I've never used the expanded scale (over 500 grains) for reloading work.
14 July 2010, 04:59
homebrewer
I'll throw mud in the pool and say I like the RCBS Rangemaster 750. It's small, cheap, easy to calibrate and does the job for me. It stays on forever. I like that...
14 July 2010, 05:07
greenjoy
That would make those bees KILLER BEES!