21 February 2007, 18:05
10at6Another Bushing Die Question
Can a 22-250 full length die be used to FL size 6mm/22-250 cases by exchanging the bushings? I know a neck bushing die will work like this, but not sure about the FL. Thanks
22 February 2007, 00:51
DwightI believe it will work but you can call Sinclair International to verify.
23 February 2007, 08:15
308SakoI use this method in many instances where the purchase of a die set for a limited amount of loading would not be advisable. It should work with ease being the same basic case. I am able to size .308, .260, and .243 in one die.
Note the seating die issue is a bit touchier!
Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
25 February 2007, 01:21
FMCquote:
Originally posted by 308Sako:
I use this method in many instances where the purchase of a die set for a limited amount of loading would not be advisable. It should work with ease being the same basic case. I am able to size .308, .260, and .243 in one die.
Note the seating die issue is a bit touchier!
True, I couldn't find a 340 WBY die and instead bought a 300 WBY S Neck die and just bought the correct bushing I needed for my 340 Wby.