The Accurate Reloading Forums
Das Kratensplaten Loudenboomer
29 March 2005, 05:00
DigitalDanDas Kratensplaten Loudenboomer
My .416 Rigby will arrive in mid May. Stay tuned for pictures, details, and the sound of distant rumbles in the western part of the central part of the Windy State. They're gonna hate me at the Hernando Sportsmen's Club.

The neighbors might hate me too after I uncork one on the nearest crat that used-to-exist-but-now-drifts-through-the-air-as-fuzz-and-vapor. This is gonna be FUN!

Dan
Pres., TYHC
www.Bigbore.SmallGamePlinker
If yuro'e corseseyd and dsyelixc can you siltl raed oaky?
29 March 2005, 05:26
N. S. SherlockYou may wish to begin building your offhand bench? Tell us about the beast!
"Make yourselves sheep and the wolves will eat you" G. ned ludd
29 March 2005, 05:42
DigitalDanI shall reveal only that it is custom built on a mag. Mauser action by a fella that knows which way is up. When I have 9/10ths of the law on my side I shall post ALL the gory details with pics.

It has REAL wood for a stock, how...quaint.

yes, a stand up bench is in order! Ready on the Left?
Dan
Pres., TYHC
www.WhereIs.ThatCrat ?
If yuro'e corseseyd and dsyelixc can you siltl raed oaky?
29 March 2005, 06:59
ToolmakerI too was planning a purchase of a .416 in the near future, until a certain deal fell in my lap.
I was looking at the CZ's - for $700 bucks or so, it was worth the cost. Now, mebbe in the fall...
Toolmaker
29 March 2005, 15:24
DigitalDanSave your nickels and dimes! You might need to do a little work on the CZ, they have a rep for cracking stocks in that chambering. Mebbe add a cross bolt?

If yuro'e corseseyd and dsyelixc can you siltl raed oaky?
30 March 2005, 03:48
N. S. SherlockSuccess to your work!
"Make yourselves sheep and the wolves will eat you" G. ned ludd
30 March 2005, 05:25
BirmanSmall arms again eh Danoe?

You will get something worth a hill of beans soon I hope.

Birman
I reverse at My Bowl
30 March 2005, 08:05
Dragon LadyBirman haiku #4
Beau coup big burret
Very smarr brue eye kitty
Finger twitch-very big hore
HA HA! Hory Cat Batman! HA HA!
Albert and Lil Bob are gonna hate you too Dan. I am pretty sure that teir mouths won't allow them to use a straw to suck up that mist!

derf
Quando Omni Flunkus Moritati
31 March 2005, 10:37
Old Elk HunterI had a 416 Rigby in a Ruger No. 1. With that rifle I found my recoil limit. Traded for a 458 Win Mag. Much milder. I use it when Krat revenge needs to be delivered with feeling and passion. Hornady 350gr Hollow points will drive an offender part way into the barn wall. Big bores are so satisfying. Share your experiences with us.
RELOAD - ITS FUN!
01 April 2005, 00:06
DigitalDanI may well find my own limit with this one OEH, but I gotta find out. It's a bit heavier than the No. 1, about 10 pounds as I recall, with glass but no ammo. Mebbe a little more. I think the reason you like the .458 more is the lighter bullets. 500 grains and full load of coal will still thump ya. Anyway, we shall see what we shall see. I'm not terribly concerned in any case, I've popped off a .338 win a few times with no bruises, and some time back I used to pump up the octane on a .50 cal ML with large chunks of lead. 3" 12 ga in an H&R Topper didn't hurt but I couldn't hang onto the forend.

Didn't care much for it 'cause people at the range looked at me funny after they came out from under the benches.
Will let you know.
If yuro'e corseseyd and dsyelixc can you siltl raed oaky?
Geez Louise, yah got too love the big bores!

My current shoulder dislocator is a NEF 45/70 throwing a 405 at about 1850. That little piece is bloody rude when it pukes out a round!

Now my 50cal Caplock with 120 gr of FFG and a buffalo bukket is much easier to handle and much my fav toy.

derf
Quando Omni Flunkus Moritati
06 April 2005, 18:59
Pat B.Dan, you're in for some good times !!!
I built up a couple of .375's a few years ago and have shot any number of critters with them. It is a frightfully effective round for small game such as crats and squil... Works equally well on 2,000 pound bulls. I can only imagine that the .416 will be more of the same !!!