The Accurate Reloading Forums
+300 gr mold for 375HH

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1811043/m/8971068841

27 January 2011, 19:34
Jken
+300 gr mold for 375HH
Need help.
I have been looking for a +300gr (flat or round nose) mold with GC for my 375HH, and havent found it yet.
Does anybody know of a mold I can use, or is custom made the only way.
Is there a mold with size close by, that can be sizet down to 0.377- 379.


A famous mom said: Stupid is, who stupid does.
27 January 2011, 21:43
N_Coran
You might try NEI Handtools, click our catalog, then click bullet mold pictures, look up .375. They have several 300+ gas check designs. http://www.neihandtools.com/
27 January 2011, 23:39
SmokinJ
Look at BARore's molds. Here's the website:

http://www.brp.castpics.net/R1.html

Great molds, good price. If you get one tell him Look at the two bottom ones in the .375 section

Joe sent you.
29 January 2011, 02:08
Jken
Thanks guys.

I really liked the heavy bullet at BRP, but they dont axcept creditcard or paypal. That makes it a little difficult for me. I have to look at NEI again.


A famous mom said: Stupid is, who stupid does.
29 January 2011, 06:01
Nobade
check out accurate molds. He takes Paypal, makes custom sizes, and turnaround is about two weeks. Great molds too!
30 January 2011, 07:21
Rockrat
Too bad on BRP. That 310gr bullet works very well in the 375 H&H.

Tom at Accurate moulds has a 38-300B 300gr. mould and he will add a lube groove/driving band if you ask him. Would probably bring it up to 330gr or so.


DRSS
Beretta 45-70 belgian mag
Tikka 512S 9.3 x 74R
Baikal o/u 30-06
Looking for next one
31 January 2011, 01:43
Jken
Accurate molds was a new place to me.
Their website looked very nice and easy to navigate in. Exellent catalog.
The 38-300B bullet was a good starter. With some ajustments this bullet will be beautiful on pigs or whatever crosses my ironsights.
I will do some measuring and send them a mail. This is gonna be big fun.
Thanks again.


A famous mom said: Stupid is, who stupid does.
31 January 2011, 08:13
Idaho Sharpshooter
I shoot one of their GC moulds that is about 310gr + GC and lube. 1700fps, 2" for 5 shots at 100 yds in two different H&H's.

Rich
31 January 2011, 16:01
M 98
Try VERAL SMITH makes some great moulds,and can make any bullet weight .... did a 400 gn 416 mould for me, it drops really nice bullets...im very happy with the mould
31 January 2011, 16:04
M 98
RICH
does the base of the bullet stick down below the case neck in the 375 h&h which you use those bullets in
03 March 2011, 04:16
Hipshoot
My Lyman mold #375449 drops them at 277 gr. cast from straight WW. It is a FNGC design.
Is that close enough?

Hip
03 March 2011, 08:36
Idaho Sharpshooter
M98,

nope.

Rich
04 March 2011, 21:03
raamw
I purchased several boxes of this fellows 375 cal 320grn GC bullets several years ago, first class bullets

e has all different weights in 375

http://bullshop.gunloads.com/tbs_riflebullets30.htm


NRA Life Member, ILL Rifle Assoc Life Member, Navy