The Accurate Reloading Forums
Re: seating cast bullet with lube groove above case

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1811043/m/854107431

16 May 2004, 09:46
Dino32HR
Re: seating cast bullet with lube groove above case
Bob,

Yes, it's good to seat the bullet into the rifling if you can, BUT - have you ever shot this load like that? If you have not, you should start with less powder and work-up to your normal load. A round seated firmly into the lands will have higher pressure than one with some amount of headspase.