First, thanks for help with load suggestions. I worked from 50 to 55 gr 5744, as suggested on this board. The 55gr loads shoot well, and are pleasant. My Chrony says about 2100fps, a hair faster than the 2000 I had expected. Am I likely to get into any issues with fouling at these velocities? I'm using wheel weight metal and gas checks on a 350gr bullet from the RCBS mould.

a good lube will keep the bore clean past 2400fps MV. Don't ask how I know... Just use a good lube and you are good to go.

Rich
Buff Killer