17 October 2005, 07:01
bartscheNeed.375 bullets
Do any of you out there know where I can get 300gr plus, gas checked .375 cal. bullets?I want to test them in my .375X41 along with the experiments in the (.358) 9X41. I really don't need a lot, 30 to 50 would be fine.
thanks roger
17 October 2005, 16:24
475/480I have 2-375 rifle bullets,weight is a little light though.I dont remember the noselengths
260gr FP Borerider noselength .600??
290gr LFNGC- noselength .550 ??,
Both of these are gaschecked.
I know I have some of the 290gr cast up already not sure about the 260gr,if you would like 30-50 you pay shipping and I will send them to you.email me if interested.
Sean
17 October 2005, 20:27
Sky C.Roger-
I have two different designs you could try.
1) NEI .379-305-RNGC design with the "DD" ring"
2) MOS .379-300-FNGC design - ~70% meplat
About 30 of each on hand. Send me a PM if interested.
19 October 2005, 21:01
Sky C.Roger-
Bullets went out yesterday.
The NEI were cast by a friend. I don't know the alloy for sure but would guess 50% WW & 50% Lino. Those are unchecked, unlubed, unsized.
MOS bullets are HT WW alloy. Hardness should be >20. They are wearing Hornady GC's, a lube which is 50% LBT Blue & 50% DARR, and were sent through a .379 sizer. Play with/modify as you see fit. Will be interested to hear the results of your testing.
Best regards-
Sky
20 October 2005, 04:58
bartschequote:
Originally posted by Sky C.:
Roger-
Bullets went out yesterday.
The NEI were cast by a friend. I don't know the alloy for sure but would guess 50% WW & 50% Lino. Those are unchecked, unlubed, unsized.
MOS bullets are HT WW alloy. Hardness should be >20. They are wearing Hornady GC's, a lube which is 50% LBT Blue & 50% DARR, and were sent through a .379 sizer. Play with/modify as you see fit. Will be interested to hear the results of your testing.
Best regards-
Sky
Thanks Sky!! I'll keep you tuned in to how the little .375x41 performs.
roger