The Accurate Reloading Forums
Custom sizing dies
21 March 2018, 09:15
outback32Custom sizing dies
Is there anyone that makes custom sizing dies. I need a .432 for 44mag. And probably. 360 for 357
23 March 2018, 21:50
Lamarif you had a star you could just call magma and order what you want.
for a lyman or lee push through type.
go over to cast boolits, go in their VS section and look for a guy called Lathesmith, he will make what you want.
23 March 2018, 22:55
sharpsguyLee will make custom sizes at a reasonable price. I have a half dozen or so. You just have to call them and ask for what you want.
There's a few guys on the Castboolits site that make them. I had some oddball sizes made by someone on that site years ago and quality and price were fine. Can't remember his handle though.
FYI Lyman list a 0.360" sizing die.
25 March 2018, 17:53
p dog shooterJust take the closest smaller Lee and polish it out to what you need.
26 March 2018, 22:31
TCLouisAre you going to use them in a Star, RCBS or Lyman.
Then just order the dies.
Lee makes or will make about anything you want.
Buckshot is likely the guy on the cast boolits site that made the custom sizing die.
Don't limit your challenges . . .
Challenge your limits
quote:
Originally posted by TCLouis:
Buckshot is likely the guy on the cast boolits site that made the custom sizing die.
Yes, it was him. An absolute pleasure to deal with too.
28 March 2018, 03:51
Brian CanadaHe made a sizing die for me and his work and service was perfect.
IHMSA BC Provincial Champion and Perfect 40 Score, Unlimited Category, AAA Class.
30 March 2018, 05:04
Gundog 64Recently ordered a custom push through sizer from Lee. You can order them right off the website and it came in about 10 days, works like a charm.
31 March 2018, 06:40
Brian CanadaGundog 64, Good to know. Thanks.
IHMSA BC Provincial Champion and Perfect 40 Score, Unlimited Category, AAA Class.
31 March 2018, 08:09
res45NOE, Get the Sizing die body. Then purchase separate interchangeable sizing die bushing for either rifle or pistol.
Just select the caliber below the die body and there is a list of different diameters of bushing. Body bushing are for sizing the entire dia. of the bullet where as nose bushing are for just sizing the nose portion of the bullet as in bore rider designs.
http://noebulletmolds.com/NV/i...dfsj5ll29egnv340p91602 August 2018, 02:04
KenT7021S&S Firearms make custom Lyman/RCBS style sizing dies.Cost is $38.00.