The Accurate Reloading Forums
Hardcast recommendations 460 S&W
07 May 2017, 23:40
hunteratheartHardcast recommendations 460 S&W
Looking for recommendations. 340gr or higher for buffalo hunt with 460. Want to reload own. Load suggestions also welcome
DRSS
Sabatti 450\400 NE
Merkel 140-2 500 NE
08 May 2017, 18:58
Cold Trigger FingerDo you want to buy bullets or cast your own ? I know that you can't break a Belt Mountain Punch bullet in an animal at 460 S&W velocities. Also, I don't know what your target velocity is. Do you want to make it go as fast as possible? What barrel length , what firearm ? Ect. Ect.
This would be a good mold to start with IMHO.
http://www.accuratemolds.com/b...bullet=45-360G-D.png.
Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
08 May 2017, 19:11
Cold Trigger FingerBut this may be perfect for what your looking for .http://www.accuratemolds.com/bullet_detail.php?bullet=45-400A-D.png
http://www.accuratemolds.com/b...bullet=45-400A-D.png
Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
08 May 2017, 19:51
Cold Trigger FingerOr this bullet could be the ultimate for your 460 .
http://www.accuratemolds.com/b...bullet=45-400D-D.pngThese are just from 1 mold maker . There are several . Also, it depends if you are of the light and fast or heavy and slower school of thot . The 460 S&W can move a 400 gr boolit along pretty quick so a lot depends on you.
Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
08 May 2017, 19:56
Cold Trigger FingerHodgdon
Menu
SET YOUR SIGHTS ON PISTOL RELOADING DATA
Find what you need in four easy steps. Select your cartridge type from the drop-down list. Then select your bullet weight, powder manufacturer and powder type. If you're unsure, or just want options, check as many boxes as you'd like. Click "Get Data" to view results.
CARTRIDGE
460 S&W MAGNUM
ADD CARTRIDGE
CARTRIDGE
460 S&W MAGNUM
STEP 1
SELECT CARTRIDGE
STEP 2
BULLET WEIGHT
STEP 3
MANUFACTURER
STEP 4
POWDER
Hide Filters
UPDATE DATA »
Your search returned 9 loads.
Email Data
Case: Starline Twist: 1:20" Primer: Winchester LRM, Large Rifle Magnum Barrel Length: 10.743" Trim Length: 1.790"
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerIMR
PowderIMR 4198
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains32.0
Velocity (ft/s)1,372
Pressure35,200 PSI
Maximum Load
Grains35.0C
Velocity (ft/s)1,486
Pressure41,500 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerHodgdon
PowderCFE BLK
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains40.1
Velocity (ft/s)1,631
Pressure35,700 PSI
Maximum Load
Grains44.0C
Velocity (ft/s)1,747
Pressure42,200 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerHodgdon
PowderH4198
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains35.0
Velocity (ft/s)1,484
Pressure40,000 PSI
Maximum Load
Grains38.0C
Velocity (ft/s)1,596
Pressure46,600 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerHodgdon
PowderH4227
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains28.0
Velocity (ft/s)1,516
Pressure48,700 PSI
Maximum Load
Grains32.0
Velocity (ft/s)1,647
Pressure56,600 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerWinchester
Powder296
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains30.0
Velocity (ft/s)1,553
Pressure45,300 PSI
Maximum Load
Grains34.0
Velocity (ft/s)1,693
Pressure55,700 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerHodgdon
PowderH110
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains30.0
Velocity (ft/s)1,553
Pressure45,300 PSI
Maximum Load
Grains34.0
Velocity (ft/s)1,693
Pressure55,700 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerHodgdon
PowderLil'Gun
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains33.0
Velocity (ft/s)1,665
Pressure47,200 PSI
Maximum Load
Grains36.8
Velocity (ft/s)1,796
Pressure56,400 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerHodgdon
PowderTrail Boss
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains7.0
Velocity (ft/s)695
Pressure21,100 PSI
Maximum Load
Grains8.0
Velocity (ft/s)754
Pressure24,000 PSI
BULLET WEIGHT395 GR. CPB WLN GC
ManufacturerHodgdon
PowderTitegroup
Bullet Diameter.452"
C.O.L.2.185"
Starting Load
Grains12.0
Velocity (ft/s)1,138
Pressure41,000 PSI
Maximum Load
Grains14.6
Velocity (ft/s)1,255
Pressure55,200 PSI
Hodgdon
IMR
Winchester
Connect with Us:Facebook
© Copyright 2017 Hodgdon Powder Co. All Rights Reserved
Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
09 May 2017, 04:35
hunteratheartBuy not cast my own at this point. Figure 1600-1800 fps sufficient. Coming out of 10.5" barrel
DRSS
Sabatti 450\400 NE
Merkel 140-2 500 NE