The Accurate Reloading Forums
Anyone else get too much lube?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1811043/m/5761085601

01 April 2009, 19:09
James Kain
Anyone else get too much lube?
Dose anyone else get too much lube on there bullets when lube and sizing?


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
03 April 2009, 11:01
jeffstamper
You just need to adjust the "depth stem" and if that doesn't take care of it then maybe you are in need of a lube heater so as you do not have to have so much pressure on the lube thus causing it to kinda squirt out on those areas...
03 April 2009, 17:46
James Kain
Thanks, funny thing is in the winter my shop is not heated. So I use a blow torch to heat the lube enough to use the lube.
That a side in the summer if I use the heater I should get more uniform lube flow? Because as far as I know I have my seating depth about right.
Thanks for the incite!
James


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
16 April 2009, 19:17
MT Gianni
Use a trouble light to heat your sizer. Start with a 75 watt bulb and go to a 100 if you have to. Buy a lot of bulbs now so you are not stuck when we are all florescent.