The Accurate Reloading Forums
cutting a 375H&H barrel

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1411043/m/998108588

03 July 2008, 15:53
yes
cutting a 375H&H barrel
Hi
I wonder if there are somebody hunting with shortbarrei 375H&H in Africa? I feel my barrel is too long and want it shorter like 20-22 inches for better handling. if you use a short barreled 375 or have exprience please tell me about it.
regards
YES


Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery.
03 July 2008, 16:07
jvw375
My .375 has a 23-inch barrel and is just about perfect. A lot depends on the gun, of course, but I feel 23-inches is just about the minimum. Too much muzzle flip and muzzle blast for my liking with most short-barrelled big bores.
03 July 2008, 17:56
zimbabwe
My Brno 602 in 375 and my CZ 550 in 416Rigby are both 21" and have both been used in Africa with much success with the 416 taking my last Elephant. I find them to be most handy especially when getting in and out of a truck cab. They swing good and just feel RIGHT.


SCI Life Member
NRA Patron Life Member
DRSS
03 July 2008, 18:35
Scott450
I have a .375H&H and a .458Lott with 22 and 23 inch barrels respectively and am very happy with them. .375 is a CZ 550 and the .458 a custom ZKK602
03 July 2008, 19:21
LRH270
Mine's 21.5 and handles like a Ferrari.


______________________

RMEF Life Member
SCI
DRSS
Chapuis 9,3/9,3 + 20/20
Simson 12/12/9,3
Zoli 7x57R/12
Kreighoff .470/.470

We band of 9,3ers!

The Few. The Pissed. The Taxpayers.

03 July 2008, 20:56
CA Safari Hunter
Ruger’s Hawkeye Alaskan has a 20 inch barrel. I shot one in 375 Ruger and I liked the rifle but I ended up buying a CZ. I liked the balance of the gun but I wanted a longer barrel.

If you want a short barrel, light gun, I recommend looking at the Ruger.
03 July 2008, 21:07
yukon delta
There are lots of short barreled 375's in Alaska. Depending on how they are set up I like them.


_______________________________

04 July 2008, 00:42
Tim Carney
Agree that 23" works well for my .375, a Dakota 76 and my only bolt rifle. It doesn't handle anywhere near as well as either of my doubles with 24 or 26 inch barrels...