The Accurate Reloading Forums
SCI Exhibitor List

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1411043/m/6031072071

20 January 2012, 19:25
McKay
SCI Exhibitor List
Does anyone have a list or a link for all the vendors that are going to have booths at the show? I have searched but have been unable to find one on SCI's site.
Thanks
Mac


Mac

20 January 2012, 19:42
Nevada Wapati
I couldn't find their normal list on the site either this year. The below link should take you to the show floor map. On the left hand side there is a small, scrolling list of vendors.

http://www.showsci.org/static/...gas2012/default.html
20 January 2012, 21:13
billrquimby
I emailed SCI's headquarters and asked if there was an exhibitor list on-line. Here's the response I got:

"If you go to our website, www.showsci.org, scroll to the bottom of that home page to where it says Show Info, click on 2012 Exhibitor Information, once that loads, go to the right hand side and down to 2012 Show Floor, click on that and then once this next page opens, you’ll see a list on the left side titled Exhibitor List.  If you click on a name, it will automatically go to the schematic of the floor and show you the booth number and location.
 
"Unfortunately, this list is not able to be copied or printed off for your use.  If you need further help with exhibitor names, please call Mike Wirth in our Exhibitor Dept. 520-620-9313 x319."

Bill Quimby
21 January 2012, 01:35
McKay
thanks


Mac

21 January 2012, 02:11
OldHandgunHunter
quote:
Originally posted by billrquimby:
I emailed SCI's headquarters and asked if there was an exhibitor list on-line. Here's the response I got:

"If you go to our website, www.showsci.org, scroll to the bottom of that home page to where it says Show Info, click on 2012 Exhibitor Information, once that loads, go to the right hand side and down to 2012 Show Floor, click on that and then once this next page opens, you’ll see a list on the left side titled Exhibitor List.  If you click on a name, it will automatically go to the schematic of the floor and show you the booth number and location.
 
"Unfortunately, this list is not able to be copied or printed off for your use.  If you need further help with exhibitor names, please call Mike Wirth in our Exhibitor Dept. 520-620-9313 x319."

Bill Quimby


That does work, but I've found the list there to be incomplete.


When you get bored with life, start hunting dangerous game with a handgun.
21 January 2012, 04:51
Lucky1
If you go down to the bottom left of that window there is a printer icon (need to look closely). Hit that and you can print out the list of booth numbers and vendors (14 pages long). I posted complete directions on this under "AR member SCI Booth numbers". Good luck!
John
22 January 2012, 01:33
LionHunter
The map on-line is not 100% correct and is subject to further modification.


Mike
______________
DSC
DRSS (again)
SCI Life
NRA Life
Sables Life
Mzuri
IPHA

"To be a Marine is enough."
22 January 2012, 11:48
billrquimby
I'm unable to reach the list with my dial-up modem. To find my exhibitor friends, I'll have to wait until I get to 'Vegas and use the map that comes with the members' packets.

Bill Quimby
22 January 2012, 23:13
Larry Sellers
Hi Bill, glad to see you will be at SCI. Will make it a point to say hi and spend a few moments or so. You can go on the SCI Website, go to Convention, then go to Show floor. A list of exhibitors will be on the left hand side. Scroll down to an exhibitor, click on it and it will sweep you to their booth location and you can see their booth number. I haven't figured out how to compile a list like in the past and print it out. The way I mentioned is very slow, and you must hand write a list of folks you find this way. Good luck and hopefully someone will come up with a better solution. Later.

Larry Sellers
SCI Life Member



quote:
Originally posted by billrquimby:
I'm unable to reach the list with my dial-up modem. To find my exhibitor friends, I'll have to wait until I get to 'Vegas and use the map that comes with the members' packets.

Bill Quimby

23 January 2012, 03:12
billrquimby
Hi Larry.

"Slow" is the word. I can get to "Show Floor," but "Exhibitor List" remains blank after waiting a full ten minutes with my dial-up setup.

We have high-speed internet at our cabin, but not down here in Tucson.

We'll be in Tucson less than four months this winter and I foolishly decided I could get along without it.

Look me up at noon after our "First African Safari" seminar ends and we can have lunch again.

Bill Quimby
23 January 2012, 19:25
Larry Sellers
Bil - Will make a note of the lunch date right now and I'll try and catch the end of your seminar like last year. Later.

Larry Sellers
SCI Life Member



quote:
Originally posted by billrquimby:
Hi Larry.

"Slow" is the word. I can get to "Show Floor," but "Exhibitor List" remains blank after waiting a full ten minutes with my dial-up setup.

We have high-speed internet at our cabin, but not down here in Tucson.

We'll be in Tucson less than four months this winter and I foolishly decided I could get along without it.

Look me up at noon after our "First African Safari" seminar ends and we can have lunch again.

Bill Quimby