The Accurate Reloading Forums
Remington Rolling Block?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1221043/m/952105181

15 January 2005, 17:17
nvmichael
Remington Rolling Block?
I have a Remington rolling block rifle in 32 rimfire with a hexagon barrel.
Does anybody have any information on this rifle? Value??
Thank You.
16 January 2005, 19:40
Brent
It is probably a #1.5 sporter which is not capable of a big bore rebarreling (.45s or even the .40s) for a BPCR capable bullet. It would work for .38-55 or similar I think.

An action and wood in real good shape brings about $600 tops but usually a more like 1/2 of that. Prices vary a good bit of course. The barrel is suitable for relining but not a lot else as I recall.

Brent


When there is lead in the air, there is hope in my heart -- MWH ~1996
06 February 2005, 16:12
hawkins
If the hammer and block are held in by screws it is a #4. If they are held in on pins and the receiver, stock wrist interface is curved it is a #2.
Good Luck!