21 December 2018, 17:32
alleyyooperMec 9000G 20ga.
I have had my Mec 9000G for over 20 years. Has been a good working reloaders for me if I kept it clean and lubed.
Recently I was having a problem with the advance jumping so hard shot would fly out of thr hulls.
I decided to do a total tear down to clean it and apply grease where required and anti sezie.
When I reassembled it it was still jumping. When readding all the trouble shooting tips it said to adjust the cam nut. I have tried it on every set and it still jumps.
Any one have any idea what I am missing. Proper settings?
I also have a 12ga Mec 9000G and it works very well but is a year newer than thr 20ga model.
Thanks in advance
Al
23 December 2018, 04:44
p dog shooterCall Mec they were very helpful in getting my 9000g properly timed.
Talked me through it on the phone.
26 December 2018, 20:28
Lamaryou've probably worn something down to the point some metal has galled.
if you don't get enough help at MEC go to shotgun world.com and look for a thread on MEC troubleshooting by Curly N
or post up your problem on the forum there.
I can guarantee a couple of guy's there know the machines better than the factory guy's do.
I ain't no help, I gave away all but one of my MEC's some time back.