The Accurate Reloading Forums
Thanks Saeed & Don

This topic can be found at:
http://forums.accuratereloading.com/eve/forums/a/tpc/f/971103014/m/582103014

22 January 2006, 22:54
.223 VARMINT-VENTALATOR
Thanks Saeed & Don
Thankyou Saeed and Don. cheers
23 January 2006, 01:46
vapodog
thumb thumb


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
23 January 2006, 03:46
Gimpy
Same here!
23 January 2006, 08:11
VFR1
Sweet Smiler Just finished cutting down a bunch of Fiocchi 2.75in hulls to 2.5in for some low pressure, 7/8oz 16ga loads for my English double.
23 January 2006, 12:03
Saeed
Gentlemen,

You are very welcome.


www.accuratereloading.com
Instagram : ganyana2000
23 January 2006, 12:43
Mark
VFR,

Are you going to roll crimp or do you have a method of putting a star crimp on short shells?


for every hour in front of the computer you should have 3 hours outside
25 January 2006, 06:59
VFR1
Mark, I use a six point crimp. Mec makes an adapter to convert the press to load 2.5in shells. I ordered it directly from them. Bob