THE ACCURATERELOADING.COM SHOTSHELL RELOADING FORUM

Go
New
Find
Notify
Tools
Reply
  
cheddite 410
 Login/Join
 
One of Us
posted
Do any of you fine folks load Cheddite 3" hulls with Ballistic Products Stump or MG410 wads under 11/16 oz of #8 and Lil Gun or H110?

I've loaded the stump to Ballistic's specs and the shot column is quite short and it's tough to get a good crimp. I've also tried the same combo with the MG410 wads and it was slightly better but not what I'd call optimum.

If some of you do use a similar combo to this I'd like to hear about it.

Thanks in advance for you time.


**************************The two enemies of the people are criminals and government, so let us tie the second down with the chains of the Constitution so the second will not become the legalized version of the first.
 
Posts: 282 | Location: South West Wisconsin | Registered: 27 February 2010Reply With Quote
One of Us
posted Hide Post
Not the answer to your question, but I have tried some of the BP recipes in 16 ga and found that many of them do not properly fit in the shell.
They must develop their loads on a typewriter or computer.


NRA Patron member
 
Posts: 2628 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia