THE ACCURATERELOADING.COM SHOTSHELL RELOADING FORUM

Go
New
Find
Notify
Tools
Reply
  
2400 Powder
 Login/Join
 
One of Us
posted
Any one have any loading information for 410 shotgun using 2400 powder? Need a starting load to start with. killpc
 
Posts: 99 | Location: Northeast Missouri | Registered: 14 May 2005Reply With Quote
new member
posted Hide Post
Jebb-

We need a whole lot more information... What hulls? What primer and wad are you going to use? 2/1/2 or 3" shells. What shot load are you going for? 1/2 oz?

All of these factor in to the load data. If you can give us these answers, we can probably come up with some data for you.

2400, H110 and WW296 all make excellent .410 loads.
 
Posts: 24 | Location: South Carolina | Registered: 16 December 2007Reply With Quote
One of Us
posted Hide Post
xsskeet:
I am looking at using Win hulls,WAA410HS wads, win 209 primers, in 2 1/2 or 3".
Also have some Remington hulls in 2 1/2 and 3"..........
 
Posts: 99 | Location: Northeast Missouri | Registered: 14 May 2005Reply With Quote
new member
posted Hide Post
Jebb-

For the Winchester HS 2 1/2 hulls -

WW209 Primer
WWAA410HS Wad
12.0 grains of 2400
1/2 oz of shot.

For the Remington STS hulls, no loads were listed for 2400 and 1/2 oz shot

For the 3" Winchester HS hulls, they show the same components and charge weight of 12.0 grains of 2400, but the shot load is 11/16 oz.

This data is from the Lyman 5th Edition.

Hope this helps.
 
Posts: 24 | Location: South Carolina | Registered: 16 December 2007Reply With Quote
One of Us
posted Hide Post
Go to the Alliant powder web site and look under their reloading guide, they have loads for both Winchester and Remington hulls in 410 using 2400 powder


Chic Worthing
"Life is Too Short To Hunt With An Ugly Gun"
http://webpages.charter.net/cworthing/
 
Posts: 4917 | Location: Wenatchee, WA, USA | Registered: 17 December 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia