THE ACCURATERELOADING.COM SHOTSHELL RELOADING FORUM

Go
New
Find
Notify
Tools
Reply
  
Best way to meter STEEL powder
 Login/Join
 
One of Us
posted
Weighing each charge is too time consuming when using STEEL powder.
I have a PW 375.
Does any one use an electronic powder measure and have had any success with STEEL powder?
Thanks
 
Posts: 408 | Location: morgan city, LA | Registered: 26 February 2005Reply With Quote
One of Us
Picture of johnch
posted Hide Post
I use a Lyman 1200DPS #3 powder dispenser
It will have a charge ready before I get the one before loaded

It is suposed to be accurate +- .1 grain
The few I weighted on my other scale , all seemed to be right on

It realy takes the chore out of loading a flat or 2 of duck loads

John


NRA life
Delta
Pheasants Forever
DU
Hunt as if your life depended on your results
 
Posts: 591 | Location: NW ,Ohio 10 Min from Ottawa NWR | Registered: 09 January 2005Reply With Quote
One of Us
posted Hide Post
Thanks
 
Posts: 408 | Location: morgan city, LA | Registered: 26 February 2005Reply With Quote
One of Us
Picture of Skinner.
posted Hide Post
I use my Redding BR powder measure just like weighing charges for rifle loads. Then dump into an cutoff hull and into the hull in the press through a funnel.
 
Posts: 4516 | Registered: 14 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia