18 January 2019, 07:34
Beretta682ETimney trigger on cz 452
Anyone install a timney on a cz 452 ?
Thinking of upgrading my cz before splurging on a cooper.
Thanks
Mike
30 January 2019, 05:18
Idaho RonI installed one on my CZ455 varmint.
30 January 2019, 05:19
Idaho RonThe instructions say that you might have to remove some wood to make it fit. I think so many guys do this up grade that CZ changed the stock to accommodate the trigger.
05 February 2019, 03:21
Heym SR20I have an older Brno Model 2. Same as the CZ 452. I first the existing trigger. Made the pull much better. But then spent some money and put in the Timney trigger. Transformed the rifle. I have also restocked so it now handles like a stalking rifle. Shoots very well.
05 February 2019, 17:10
WinkI installed a Rifle Basix trigger on my 452. I did have to slightly file the opening in the floor plate where the trigger touched a bit, just barely. Excellent control of pull weight and a super clean break.
https://riflebasix.com/product-category/cz-usa/23 February 2019, 09:05
Beretta682EI gave one of my 452 to the gunsmith to install a timney trigger.
I plan to get a CNBC metal trigger guard too.
If like how the gun shoots I will replace trigger on my other 4 guns.
Over time I might upgrade the scopes from Nikon prostaff to something better too.
Thanks for all the info and advice.
Mike
19 May 2020, 09:01
Beretta682EFinally got the gun back.
My guns put a rifle basix trigger.
Need to go shoot it next week.
Mike
The factory trigger can be adjusted very well.
I am actually shooting one now that I have adjusted the trigger on, and have installed a brass barrel tuner I made.
I will post the results later on.
The tigger feels very good.
23 May 2020, 18:36
Michael MichalskiLike my CZ's; love my Cooper.
26 November 2020, 08:49
Beretta682EInstalled a Timney trigger on a 452.
Turns out after installing the Timney the stock needs to be inlet. This is pathetic. Why design a drop in trigger than does not work with the stock the rifle comes with.
Finding a gunsmith who can work with wood in central Florida. That should be fun.
Mike
26 November 2020, 14:27
SaeedThe standard trigger is very good on these rifles.
26 November 2020, 21:44
kurtbeNot sure the 452 and 455 are the same trigger, but my 455 trigger sucked! Timney replacement dropped right in (thank god) Very nice trigger! CZ must have opened that part of the stock on the later model. Good luck Mike