Moderator
| no .. those actions have a small thread diameter and this 404 is of the largest in length and case diameter. |
| | |
One of Us
| Thanks. Kinda what I figured. I don’t think I have seen anything bigger on one than a 9.3x62 so far. What is the largest cartridge they have been chambered for......safely? I know the 9.3 I had and the one I am having made now is very light for the power you get from the 9.3 but for a rifle carried more than shot is not a bad thing |
| | | Posts: 762 | Location: Tallahassee, FL | Registered: 11 December 2004 | 
IP
|
|
One of Us
| Will a 9.3x64 fit? |
| | |
One of Us
| quote: Originally posted by thirdbite:
Will a 9.3x64 fit?
Stick to the 06 cases on the small rings. |
| | | Posts: 1839 | Location: Western South Dakota | Registered: 05 January 2005 |
IP
|
|
One of Us
| Plenty of belted mags were made on the Husqvarna small ring...not staring a dog fight...just information to ponder |
| | | Posts: 3453 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013 |
IP
|
|
One of Us
| Someone correct me if I am wrong
But is it so that a 404 can be built on a
375? Length action. As in re barreling
A 375 or 458 to 404 |
| | | Posts: 1456 | Location: maryland / Clayton Delaware | Registered: 16 December 2004 |
IP
|
|
One of Us
| You're right...and lots of small ring 98s are same length as most large ring. And it's wise to remember the bulk of an action doesn't necessarily determine it's yield point.
PO Ackley showed how the Arisaka made a bum out of most everything else. |
| | | Posts: 3453 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013 |
IP
|
|
One of Us
| quote: Originally posted by Duane Wiebe (CG&R):
Plenty of belted mags were made on the Husqvarna small ring...not staring a dog fight...just information to ponder
Yes you're right Duane. I've also seen some big girls in really small bikinis. I'm not knocking the big girls or the small bikinis. Check out the newest issue of Sports Illustrated. Watch out for the ....... There's also a bunch of V8 motorcycles cruising around Sturgis right now. Plenty of room on the back for the girl in the bikini. As Burgess pointed out there's not as much hoop strength on a small ring barrel thread as there is on a large ring. |
| | | Posts: 1839 | Location: Western South Dakota | Registered: 05 January 2005 |
IP
|
|
One of Us
| quote: Originally posted by Duane Wiebe (CG&R):
PO Ackley showed how the Arisaka made a bum out of most everything else.
He also made a display board at Trinidad filled with intentional blown up G33/40 actions. I guess they were easy to find back in the day. However, IMO the Husky and the Brno22 action are better steel than the 33/40. |
| | | Posts: 1839 | Location: Western South Dakota | Registered: 05 January 2005 |
IP
|
|
One of Us
| No debate intended, but G 33-40's were made by BRNO |
| | | Posts: 3453 | Location: Phone: (253) 535-0066 / (253) 230-5599, Address: PO Box 822 Spanaway WA 98387 | www.customgunandrifle.com | Registered: 16 April 2013 |
IP
|
|
One of Us
| is a 9.3x62 ok on a BRNO 21? |
| | | Posts: 504 | Location: California | Registered: 04 February 2013 |
IP
|
|
One of Us
| Any action that can take a 30'06 will also take a 9.3X62. quote: Originally posted by 10generation:
is a 9.3x62 ok on a BRNO 21?
"When the wind stops....start rowing. When the wind starts, get the sail up quick."
|
| | |
One of Us
| Interestingly, there's a Herman Waldron HVA small ring in 7mm STW for sale on Champlin's website. Not only fat, but long. |
| | |
