One of Us
| what side plate?? grips?? |
| | | Posts: 13440 | Location: faribault mn | Registered: 16 November 2004 | 
IP
|
|
One of Us
| The slide stop used to push against a pin in the frame. I guess with gen 2 or 3 there's a side plate under the left grip attached with a pivot pin. the lower fork is there to stop the plate from moving. Apparently that fork is the failure point. You can see what happens when the plate is mis alligned. the pin from the slide stop slips off the bottom  |
| | |
one of us
| That is weird! Did you talk to them about it? peter.
Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;
|
| | | Posts: 10505 | Location: Jacksonville, Florida | Registered: 09 January 2004 |
IP
|
|
One of Us
| It's a Gunbroker pistol and the fork was bent a bit. It seems to be a common problem and more so on the 10mm. |
| | |
