The Accurate Reloading Forums
Welcome To Our Newest Forum

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/6521043/m/968109501

13 March 2003, 07:29
Saeed
Welcome To Our Newest Forum
Gentlemen,

My good friend Paul H suggested we add a seperate Forum for wildcats, and here it is.
13 March 2003, 09:38
SDS
Originally posted by Saeed:
Gentlemen,

"My good friend Paul H suggested we add a seperate Forum for wildcats, and here it is."

Darn good idea. Everything new under one roof. No scrolling around and getting dibs and dabs according to bore diameter.

Some of you may think there is nothing new left to do, save perhaps on the upper end of the various bore diameters, and wildcatting is a matter of minutiae, merely pretending that tiny differences in powder capacity and case design and/or freebore make for substantial improvement.

I beg to disagree: the longer and heavier bullets and faster twist barrels we are getting now open up a whole new set of applications for our old cartridges and bores. .600 OK is going to be fun, though not precisely according to my taste.
13 March 2003, 12:51
Paul H
Saeed,

Thanks for adding the forum, I wasn't sure if my e-mails were making it to you, as we've had some problems here, but glad to see they made it, and that we have a new forum!
13 March 2003, 16:31
45nut
Excellent Addition !
13 March 2003, 16:45
mehulkamdar
Saeed,

Congratulations and a thank you very much for your unceasing hospitality.

AR goes to even greater strengths thanks to your patronage and the efforts of all moderators working with you. May it become even greater still!
13 March 2003, 18:44
Guy Morrison
Saeed
An amazing thing you have built (AR) here and this paticular forum will no doubt be very successful.

Guy Morrison
13 March 2003, 19:10
Bob Mehaffey
Saeed, I agree with Guy and thanks very much. I have an idea regarding a 30 PPC which I will be asking about here. Again thanks.
14 March 2003, 09:17
<GeorgeInNePa>
Man, I don't check in for a few days and you start adding forums?

Great idea, and thanks for ALL of the forums, Saeed.
13 March 2003, 23:19
thmpr
Thanks,it will be fun.
14 March 2003, 01:08
arkypete
Saeed
I thank you so very much. I've got a bucket full of questions.
Jim
14 March 2003, 07:22
HunterJim
Saeed,

Thanks for doing it and thanks to Paul H. for suggesting it. When I saw your initial post yesterday, I didn't realize how much interest it would attract. Obviously, wildcatting is alive and well. [Wink]

My opinion was that the previous shortage of .376 Steyr brass was due to the wildcatters buying it up for projects, now I am certain it was so!

jim dodd
14 March 2003, 08:23
<eldeguello>
Saeed!! Outstanding addition!!
14 March 2003, 11:24
ACRecurve
Thanks, Saeed!
15 March 2003, 05:23
dan belisle
Great new addition Saeed. Thanks. I can see this becoming my favourite place to be here at AR. - Dan