THE ACCURATERELOADING.COM AIR RIFLE FORUM


Moderators: big6x6
Go
New
Find
Notify
Tools
Reply
  
My new rifle review
 Login/Join
 
one of us
posted
I have had several break barrel guns and after being less than impressed with the accuracy of these rifles I decided to just go for it.

I got an Air Arms TX200. This rifle is a under lever spring piston rifle. This one is the MKIII model. I installed a UTG 3x12x44 compact scope on it. I recently switched to the same scope but the full length version to give more scope eye relief adjustment. These are accurate rifles, and heavy rifles tipping the scale at 10 pounds with the scope.



This rifle has an Italian Walnut stock, a German barrel, and was Built in england. The stock is a oil finish, some call the checkering a fish scale pattern. The Bluing is the quality of fine guns. It is a beautiful rifle to say the least.



The scope mount is a 11mm Dovetail but the top of the receiver has scope stop holes. I used a UTG one piece mount and rings. The mount has a screw that once adjusted will lock into the scope stop. It is a well thought out system.

The trigger is Awesome!! It is a two stage trigger with a very abrupt wall. When squeezing the trigger the first stage is light and the wall to the second stage is just solid. The second stage breaks at just over 1 pound making the gun very easy to shoot.
On that same note this rifle is not hold sensitive like some rifles I have shot. It is also not a twangy sounding rifle. It is a little louder than my Benjamin Trail NP2 but it is not loud gun at all.
For my first shooting session I shot Crosman 14.3 grain premier Domed pellets at 15 yards.
The groups were surprising. It took about 8 pellets to get on the target, then I shot this group.




My next time out I wanted to get to 30 yards with the gun. I had three pellets to test that day.
First was the Air Arms Falcon 13.4 grain domed.




The next pellet was the crosman domed 14.3 grain.




Next was the JSB Exact Jumbo Express 14.3 grain.



This rifle showed that all three pellets were very good compared to my break barrel guns. But it really showed it liked the Air Arms pellets.
That said the air arms pellets are really soft lead. The skirts are thin and the can be damaged quite easily. For me to get the group I had above I needed to "fix" the skirt on every pellet.
The crosman pellet were just shot as is. The JSB pellet is a troublesome pellet. WHile it didn't shoot bad I guess, it didn't shoot as well as the cheaper crosman.

After the testing I got a chance to test it out on some varmints. The first squirrel was a shot to the chest because his head was behind a stick.



The next day this guy shows me only his eyeball over the limb.



I needed to do some trimming on the flock size in a shed so the TX200 was used for birds too.




Well this last Monday I took the rifle out to shoot a starling. I missed! I shot at another and missed again. Well I got out a target and saw that my pellets were all over the place.
I found that my stock screws were loose. So after tightening them the rifle is back on.

The TX200 is An expensive rifle. I work in a mill for hourly wages, I am not a wealthy guy. But I wanted a gun that hits where I aim. That is what I got with the Air Arms TX200.
 
Posts: 985 | Location: Southern Idaho | Registered: 24 March 2002Reply With Quote
One of Us
posted Hide Post
Well done. I offer free squirrel and feral cat shooting at my house.....
 
Posts: 10094 | Location: Texas... time to secede!! | Registered: 12 February 2004Reply With Quote
One of Us
posted Hide Post
Good review and nice pictures to boot Ron.
 
Posts: 3796 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
One of Us
posted Hide Post
Ron, you need to kill a lot more starlings to balance things out.
 
Posts: 3796 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
one of us
Picture of TCLouis
posted Hide Post
They may be too heavy, but probably not tor a T200, but try the JSB or H&N 18 grainers for precision at distance



Don't limit your challenges . . .
Challenge your limits


 
Posts: 4223 | Location: TN USA | Registered: 17 March 2002Reply With Quote
one of us
posted Hide Post
I will give them a try
 
Posts: 985 | Location: Southern Idaho | Registered: 24 March 2002Reply With Quote
One of Us
posted Hide Post
Years ago on another forum there was a group buy on a heavy for caliber .177 mold. This heavy pellet was to be like the hammer of Thor. Almost billed to take out cape buffalo and carry a long distance. It was to do what I didn't want it to do. I do almost all my pellet shooting in my backyard and if a pellet had a parachute to stop it at my fence line that would be what I would want. Anyways this 25 grain pellet key holed. The guy that designed it claimed his design was changed. Someone reported that shooting it backwards gave accuracy. I tried them backwards and didn't get good accuracy nor penetration. Still have the mold and would like for someone with machinist skills and equipment to shave it down to where it cast a lighter pellet.
 
Posts: 3796 | Location: san angelo tx | Registered: 18 November 2009Reply With Quote
one of us
Picture of Jiri
posted Hide Post
Idaho Ron:

JSB "Express" means light for caliber pellet (for weaker air rifles). Try regular one or heavy. Especially for longer distances.

Jiri
 
Posts: 2067 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia