11 January 2016, 23:04
ernierodWalnut Hill Press
I was thinking of getting into 50 BMG shooting/reloading and I have a spare Walnut Hill press. Q-Can this press be used for 50 BMG reloading??Thanks.
12 January 2016, 00:01
butchlocdon't know anything about that press, but you need one with a long enuf stroke and capable to use 1 1/2" diameter dies
17 January 2016, 18:40
Bill/OregonErnie, let me know if you want to re-home that Walnut Hill. I have spent some pleasant hours in Richard Corbin's shop. He's a fine machinist and a real gentleman, as is his brother Dave.
06 December 2016, 05:31
ELR Researcherquote:
Originally posted by ernierod:
I was thinking of getting into 50 BMG shooting/reloading and I have a spare Walnut Hill press. Q-Can this press be used for 50 BMG reloading??Thanks.
From the manufacturer's site - in BOLD on their site - "It is not possible to reload 50 BMG cartridges with this press."
See
http://rceco.com/MN.asp?pg=pro...&specific=81&from=36As described on their site, it is appropriate for - and they have components to support - swaging .50 BMG projectiles.
19 January 2019, 16:19
GrandpasezIt works fine for doing 50cal, 50 cal russian and bigger,
with a little changing. Super strong..
Mine has short and long setting on the pivot. Use long.
and it takes screw in holders like ammomaster.
We just use an extension for shell holder to get case to reach.
And the long stroke will size case fine and for regular seating die
we screw die up and down just a littleto put loaded one in and out.
If you have tall seat die that you put bullet in the side works ok to. Ed