The Accurate Reloading Forums
What wad do you prefer?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/5031007002/m/9771017762

22 September 2021, 23:59
Bill/Oregon
What wad do you prefer?
I've used the vegetable fiber wads from John King in some of my BPCR handloads, but hear a lot of good things about low-density polyethylene wads. What is your experience?


There is hope, even when your brain tells you there isn’t.
– John Green, author
24 September 2021, 08:41
bpesteve
Vegetable wads have always worked well for me, sometimes (using paper patch bullets) combined with a grease cookie made of SPG surrounded with milk carton discs.

After cleaning out the revolting remains of plastic shot cups from BP shotgun barrels I never tried plastic again.
25 September 2021, 00:31
Bill/Oregon
Thanks Steve. I have not heard complaints about the poly wads in BPC rifles, but am familiar with the mess the plastic shot cups make in a black powder smoothbore. Never again.


There is hope, even when your brain tells you there isn’t.
– John Green, author
27 September 2021, 01:29
dpcd
Vegetable fibre is just a fancy name for gasket paper wads; after all, they are made from "vegetables). Paper.
That is what I use; either the thin or thick ones; doesn't seem to make any difference. From Buffalo arms.Forgot who made them.
Poly? I never used them but see no reason to even try.
27 September 2021, 06:33
Bill/Oregon
Thanks Tom. Buffalo Arms carries the Walters wads. I have some in .40 and .45; will order some in .50.


There is hope, even when your brain tells you there isn’t.
– John Green, author
10 July 2023, 10:52
georgeld
Another oldie I've missed.

I bought a set of hole punches from HF.

A couple sq feet of 1/16" white fiber material and punched a bunch out. All totals less than $10.

Stuffed 'em in a big pill bottle and warmed up a tube of bore butter and let 'em soak.

I use them in a Walker. Just fine, cheap and will keep forever I think. At least 15 years now and still fresh.

These might be worth trying in your cartridge guns too.

George


"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight
14 July 2023, 02:45
Huvius
quote:
Originally posted by georgeld:
Another oldie I've missed.

I bought a set of hole punches from HF.

A couple sq feet of 1/16" white fiber material and punched a bunch out. All totals less than $10.


I’ve done exactly the same but I don’t lube mine.
The HF set has 3/8’ which works great for 360BPEs, 7/16” which works for 400s and 1/2” which is good for the 500s.
For my 450s I buy from Buffalo Arms but I should make a punch out of a sharpened 45-70 case.
The card stock I make mine from is white card from sterilizer biological test packs.
Works great and is free to me so, you know, I have to use it!