Pan Lubing BPCR Bullets My Way

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/5031007002/m/7831096342

13 July 2018, 09:20

TexasMac

Pan Lubing BPCR Bullets My Way

The subject article was recently published in The Single Shot Exchange Magazine. For those that are interested and do not have a subscription, click on the following link below.
http://www.texas-mac.com/Pan_L..._Bullets_My_Way.html

Wayne

NRA Life (Benefactor) Member, TSRA Life Member, NSSF (National Shooting Sports Foundation) Member, Author/Publisher of the Browning BPCR book.

13 July 2018, 23:11

TexasMac

A guy on another forum suggested using the insert from a MTM 100 round box and a Silicon baking dish. The silicon releases the lube without the use of any foil. Sounds like an improvement to my technique.

Wayne

NRA Life (Benefactor) Member, TSRA Life Member, NSSF (National Shooting Sports Foundation) Member, Author/Publisher of the Browning BPCR book.

15 July 2018, 19:32

Bill/Oregon

Wayne, saw your article. Where I screwed up last time I tried this was failing to pre-warm the bullets so the lube would adhere.

There is hope, even when your brain tells you there isn’t.
– John Green, author

17 July 2018, 23:00

RIP

Well I swannie! Never thought I could learn so much about something I thought was so KISS Principle.
Thanks for the article, TexasMac.

Rip ...

21 July 2018, 06:27

Dutch44

I always placed the loaded tray in the fridge after the lube cooled. Then pushed them out nose first with a gloved hand. I've done 10,000 this way the past 29 years and never knew it to be a problem. Just used a double broiler and tin cake pan.