THE ACCURATERELOADING.COM FORUMS

Go
New
Find
Notify
Tools
Reply
  
Winchestger 1885
 Login/Join
 
One of Us
posted
Gentlemen:
I have an old high wall single shot made in 1889 in .50-110. 30" no3 octagon barrel, crescent butt and target sights.

Is the short bullet in the .50-110 conducive for long range shooting? I have been told the short bullet of 300 grains has poor accuracy at mid to long range and the rifling won't stabilize longer 450- or 500-grain bullets.

What say you fellas? Is it a shooter or should I pass it on?
Cheers and thanks for your attention.
Cal


_______________________________

Cal Pappas, Willow, Alaska
www.CalPappas.com
www.CalPappas.blogspot.com
1994 Zimbabwe
1997 Zimbabwe
1998 Zimbabwe
1999 Zimbabwe
1999 Namibia, Botswana, Zambia--vacation
2000 Australia
2002 South Africa
2003 South Africa
2003 Zimbabwe
2005 South Africa
2005 Zimbabwe
2006 Tanzania
2006 Zimbabwe--vacation
2007 Zimbabwe--vacation
2008 Zimbabwe
2012 Australia
2013 South Africa
2013 Zimbabwe
2013 Australia
2016 Zimbabwe
2017 Zimbabwe
2018 South Africa
2018 Zimbabwe--vacation
2019 South Africa
2019 Botswana
2019 Zimbabwe vacation
2021 South Africa
2021 South Africa (2nd hunt a month later)
______________________________
 
Posts: 7281 | Location: Willow, Alaska | Registered: 29 June 2009Reply With QuoteReport This Post
One of Us
posted Hide Post
What's the twist rate of your barrel? If it's fast enough you can stabilize heavier bullets. Be aware that means a lot of recoil and a crescent butt plate will hurt.
 
Posts: 531 | Location: Louisiana | Registered: 01 January 2010Reply With QuoteReport This Post
one of us
posted Hide Post
Hi Cal,

Great article on "Loading & Shooting 12- and 10-Bore Double Rifles" in the latest BPCnews.

Winchester 1885, eh?
If twists in the 1885 High Wall were same as those in the 1886 LA, they are reportedly:
.50-110-300 Winchester: 1:60" twist
.50-100-450 Winchester: 1:54" twist
Same 2.4" brass case and different bullet weights and twists.
Slow twists for conical bullets by earlier standard of the .50-70-450 Govt. with 1:42" twist.
Have you checked the twist yourself?
If the "shooter" factor outweighs the "cool" factor of a rare collector gun, you are probably going to want to pass it on.
But not before you check it out thoroughly and write an article about "Loading & Shooting the .50-110-300 Winchester Model 1885" please.
tu2
Rip
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With QuoteReport This Post
one of us
posted Hide Post
Cal, Ross Seyfried has written extensively on the uses and shortcomings of the "express rifles." If I can find any of his articles I will scan and forward, but I have jettisoned a lot of my firearms archives in the course of a couple of moves. Cartridges of the World 11th says the .50-100, .50-105 and .50-110 twist rate was 1:54, which is unfortunately slow for any but the lightest bullets. The Trapdoor Springfield in .50-70 had a 1:42 twist. As I recall, the express rifles were designed for use on thin-skinned game at under 200 yards, never for heavy or dangerous game. Their relatively flat trajectories for the time telegraphed the "laser flat" trajectories soon achieved with the .30-30 Winchester as the smokeless era got seriously under way.


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16271 | Location: Sweetwater, TX | Registered: 03 June 2000Reply With QuoteReport This Post
one of us
posted Hide Post
quote:
Originally posted by Bill/Oregon:
... Cartridges of the World 11th says the .50-100, .50-105 and .50-110 twist rate was 1:54 ...

Bill,

Good reference, thanks.
Some say that 1:54" was used in the .50-100-450 1886 LA with 450-grainers, same chamber as the .50-110-300.
With an 1885 High Wall here might be hope of lobbing 450-grainers faster than in a .50-70 Govt. Trapdoor and getting the bullet to spin faster with higher MV?
But has the former owner tried that and told Cal to stick with 300-grainers?

I looked through my "Seyfried File" and noted his great work with .500-3" BPE/NFBPE, in HANDLOADER and RIFLE, but not much applicable to this. popcorn
tu2
Rip ...
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With QuoteReport This Post
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia