THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    416 Remington reloading and Varget?

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
416 Remington reloading and Varget? Login/Join
 
One of Us
Picture of Big Wonderful Wyoming
posted
I have about 700 projectiles, a variety of Woodleigh, Swift and Barnes.

I am really intrigued with shooting something with it this year (dependent on draws, and me volunteering to go to Afghanistan and not knowing when or if I am going).

Beyond that I applied for elk and oryx here in New Mexico so that would be ideal.

I have a mountain of 350 Woodleighs, and a couple of boxes of 350 Barnes TTSX bullets.

I am trying to find a suitable powder, as everything I have is either suitable for a 6.5 CM or a very limited amount of H1000.

What are you using in your light weight bullet 416 Remington loads?

Barrel is a 1 in 12 twist Lilja on a Blaser R8.
 
Posts: 7763 | Location: Das heimat! | Registered: 10 October 2012Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
w748 is on the fast side, 760 works great. tac/h335 will get you 2400fps ...


#dumptrump

opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 38379 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
Reloader 15 worked pretty well in the 416 Remingtons I've owned.


MARK H. YOUNG
MARK'S EXCLUSIVE ADVENTURES
7094 Oakleigh Dr. Las Vegas, NV 89110
Office 702-848-1693
Cell, Whats App, Signal 307-250-1156 PREFERRED
E-mail markttc@msn.com
Website: myexclusiveadventures.com
Skype: markhyhunter
Check us out on https://www.facebook.com/pages...ures/627027353990716
 
Posts: 12842 | Location: LAS VEGAS, NV USA | Registered: 04 August 2002Reply With Quote
One of Us
Picture of 4sixteen
posted Hide Post
Good results with Re15 and IMR 4064. Woodleigh manual lists Varget for their 340gr.
 
Posts: 897 | Registered: 03 May 2012Reply With Quote
One of Us
posted Hide Post
I used it with the Barnes X and it is a killing machine and also accurate. Don't overlook it.


Guns and hunting
 
Posts: 1094 | Registered: 07 February 2017Reply With Quote
one of us
posted Hide Post
quote:
Good results with Re15 and IMR 4064


This
 
Posts: 19310 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
Picture of Bwana_500
posted Hide Post
I have only shot my 416 Rem a little, but used AR2206H (H4895) for my loads so far. I have only loaded 400gn bullets, but think H4895 would be good for most bullet weights.

ADI give load data here: http://www.adi-powders.com.au/...16-remington-magnum/

Edit to add, AR2208 is Varget, so data for that in the above link too.
 
Posts: 422 | Location: Australia | Registered: 03 September 2006Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Hogbreath:
I used it with the Barnes X and it is a killing machine and also accurate. Don't overlook it.


I just picked up three boxes of 416 Barnes X bullets, the ones without the grooves.
I have read both they produce higher pressure and others say use TSX data.
What is the real story?

M
 
Posts: 1223 | Location: Arizona | Registered: 09 January 2005Reply With Quote
One of Us
Picture of 4sixteen
posted Hide Post
In theory all other factors being equal TSX less bearing surface less friction should develop less pressure for a given powder charge than XFB non-grooved. However reviewing 350gr Barnes load data they list less max charge H4895 for TSX??
 
Posts: 897 | Registered: 03 May 2012Reply With Quote
one of us
Picture of Wildcatter
posted Hide Post
quote:
Originally posted by MARK H. YOUNG:
Reloader 15 worked pretty well in the 416 Remingtons I've owned.


I bought a 416 Rem from Mark almost 20 years ago and I have used RL15 on his recommendation ever since. Works great with every bullet I’ve shot from 350 to 400 grains, lead core, partition and monolithic.

RC


Shoot the largest caliber you can shoot well, and practice, practice, practice.
 
Posts: 788 | Location: Central Texas, U.S. | Registered: 20 December 2001Reply With Quote
One of Us
Picture of 4sixteen
posted Hide Post
Fast burn rate powder 400gr reduced recoil load gonna give it a try bet it's a dark timber range stomper.

 
Posts: 897 | Registered: 03 May 2012Reply With Quote
One of Us
posted Hide Post
RL 15 is very good in my 416 rem mag as well
 
Posts: 2531 | Location: New York, USA | Registered: 13 March 2005Reply With Quote
one of us
posted Hide Post
I used mostly RL-15 and my favorite bullet is the 450 gr. Woodleigh on Buffalo, hands down...and no need for a solid, but out of habit I add one to my magazine to come up second..

Where your hunting, in the White Sands Missle base or clost, Id suggest using the 300 gr. as fast as I could push it, but the 350 Woodleigh is a great bullet in the .416, both should be just fine. The results might be a bit disapointing in that they will run a 100 yards and die, about what you can expect from a 30-06 or 300 magnum..Ive used big bores for gathering camp meat as well as on the big stuff on many ocassions, and nothing spectacular took place..good blood trails are to be expected.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 41758 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of Kyler Hamann
posted Hide Post
As others have said, I've been playing around with the .416 Rem. for about 20 years. Unfortunately it wasn't until about 5 years ago that I first tried RL 15. It was a game changer in my rifle. It went from "serviceable" to "brag worthy" with all the loads I tried. No reason for me to try any other powder in that cartridge.


___________________________
www.boaring.com
___________________________
 
Posts: 2503 | Location: Central Coast of CA | Registered: 10 January 2002Reply With Quote
One of Us
posted Hide Post
I have just started working up loads for my 416 Remington using 350gr bullets.

Plan is to use the 350gr TSX, but with tight availability of supplies I also picked up some 350gr TTSX's and Speers.

So far, the Speers are disappointing, the TSX's just fine. Have not tested any TTSX's yet.

For powders I tried TAC and H4895 trying to conserve Varget for my 338-06's. I finally tried the Varget and it will now be the powder in my 416. Fortunately I have plenty, but prior to this new use I had enough for ever.

I am getting 2578fps with excellent accuracy.
 
Posts: 2034 | Location: Black Mining Hills of Dakota | Registered: 22 June 2005Reply With Quote
one of us
posted Hide Post
quote:
So far, the Speers are disappointing


What Speer bullet are you using and what group size did you get.

My 416T shoots 350gr mag tips into nice groups.
 
Posts: 19310 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
posted Hide Post
R15 worked awesome on all bullets from 300 to 416 gr in all my 6 of my 416s . Its just just very hard to find now .It works in tons of different calibers too .
 
Posts: 2531 | Registered: 21 December 2003Reply With Quote
one of us
posted Hide Post
I found IMR4064 a bit better than RL15
 
Posts: 19310 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by p dog shooter:
quote:
So far, the Speers are disappointing


What Speer bullet are you using and what group size did you get.

My 416T shoots 350gr mag tips into nice groups.


350gr, but there is a pretty good jump to the rifling. Averaging > 2.5 inch groups.

The TSX's are consistently < 1.5 inches.
 
Posts: 2034 | Location: Black Mining Hills of Dakota | Registered: 22 June 2005Reply With Quote
one of us
Picture of BigBullet
posted Hide Post
A useful practice load I used prior to my buff hunt and just for fun shooting was 60 grains of IMR-4198 with 335 grain Bear Tooth bullet. This provided ~2350 fps. This was much lighter then the hunting load with 350 tsx at 2465 fps. The other practice load i used was with the Speer 350 gr Mag-tips and 80.0 grains of H414 for a velocity of 2150 fps. It was very accurate. Shot a bobcat at 120 yards with it. It was enough gun for the 20 lb. cat.


BigBullet

"Half the FUN of the travel is the esthetic of LOSTNESS" Ray Bradbury
https://www.facebook.com/Natal...443607135825/?ref=hl
 
Posts: 1212 | Location: Lorraine, NY New York's little piece of frozen tundra | Registered: 05 July 2003Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    416 Remington reloading and Varget?

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia