THE ACCURATERELOADING.COM BIG BORE FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    I think I will just keep it

Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
I think I will just keep it Login/Join
 
One of Us
posted
Bought this RSM in 416 Rigby as a donor to a 500 something. It's a keeper! Top left are 325 Barnes Xs, lower are 350 Speers, 125 yrds.


Millennium Data Collector - 5/25/15
(ƒ = flyers, * = deleted shots)
GROUP #1
1) 2876 -1.2
2) 2882 4.8
3) 2874 -3.2
High: 2882
Low: 2874
E.S.: 8
Ave.: 2877.2
S.D.: --

GROUP #2
1) 2641 8
2) 2622 -11
3) 2636 3
High: 2641
Low: 2622
E.S.: 19
Ave.: 2633
S.D.: --
 
Posts: 692 | Location: South Central Texas | Registered: 29 August 2014Reply With Quote
One of Us
posted Hide Post
Really! You know better. You never shoot the donor rifle!! Big Grin
 
Posts: 371 | Location: Atlanta.GA | Registered: 07 December 2006Reply With Quote
One of Us
Picture of Nakihunter
posted Hide Post
Great groups. You are really loading them hot for group #1! Hope you keep safe.


"When the wind stops....start rowing. When the wind starts, get the sail up quick."
 
Posts: 11006 | Location: New Zealand | Registered: 02 July 2008Reply With Quote
One of Us
posted Hide Post
Damn! You keep just missing those quarters!!! :-) Seriously, there's nothing you can't do with a 416 Rigby anyway.
 
Posts: 20076 | Location: Very NW NJ up in the Mountains | Registered: 14 June 2009Reply With Quote
One of Us
Picture of waterrat
posted Hide Post
Your ready for a sheep hunt now! Good Shooting!!


I tend to use more than enough gun
 
Posts: 1407 | Location: lake iliamna alaska | Registered: 10 February 2005Reply With Quote
One of Us
posted Hide Post
While the quarters seem safe enough, I think you have a keeper and Biebs (and Chief) have a point.
 
Posts: 9954 | Location: Houston, Texas | Registered: 26 December 2005Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by ChiefR53:
Really! You know better. You never shoot the donor rifle!! Big Grin

I made that mistake with a pre-64 Model 70 in .243 I bought in 1966 for $75.00, intending to make a match rifle with the action. Someone had rechambered it to .240 PSP (Page Souper Pooper). Years later, I formed some brass out of .244 Remington and took it to the range, only to discover that I could shoot a 1.5" five shot group with it at 300 meters. I still have the rifle, unaltered.
 
Posts: 1748 | Registered: 27 March 2007Reply With Quote
One of Us
Picture of 416Tanzan
posted Hide Post
Enjoy the load development.

You will probably want to switch from the discontinued 325gn Barnes-X to the 350 grain TTSX. This latter bullet can be safely loaded to over 2800fps in every rifle I've loaded for (three CZs in 416Rigby) My current loading is 101.5 grains of R-17, a fairly compact powder easily fitting in the Rigby case with the long bullet. 2820fps (2800-2850) is the nominal velocity for my rifles.

An alternative to the Barnes is the GSC 330gn HV. Personally, I have avoided the 300-gn Barnes because the poorer BC doesn't keep up with the 350gn TTSX in punch and penetration up close, or wind resistence over 300 yards. Do the math on the trajectories. (For me, the 300gn .416" comes into its own in the smaller capacities of the 416Ruger or 416Rem, where the 300-grain bullet allows a 2800fps.)


+-+-+-+-+-+-+

"A well-rounded hunting battery might include:
500 AccRel Nyati, 416 Rigby or 416 Ruger, 375Ruger or 338WM, 308 or 270, 243, 223" --
Conserving creation, hunting the harvest.
 
Posts: 4253 | Registered: 10 June 2009Reply With Quote
One of Us
posted Hide Post
When oil dropped from $100 a barrel to $46 time lines changed! Job on the line, you know.
 
Posts: 692 | Location: South Central Texas | Registered: 29 August 2014Reply With Quote
One of Us
Picture of Cold Trigger Finger
posted Hide Post
quote:
Originally posted by Nakihunter:
Great groups. You are really loading them hot for group #1! Hope you keep safe.


That's not very hot for a modern Rigby with 325 gr X .
I push 300 gr TSX out of a 22" 416 Remington at over 2900 fps with a book load of Rl 15.
The Rigby holds alot more powder than the Remington.
Yup, I would say that's a keeper, as is!


Phil Shoemaker : "I went to a .30-06 on a fine old Mauser action. That worked successfully for a few years until a wounded, vindictive brown bear taught me that precise bullet placement is not always possible in thick alders, at spitting distances and when time is measured in split seconds. Lucky to come out of that lesson alive, I decided to look for a more suitable rifle."
 
Posts: 1934 | Location: Eastern Central Alaska | Registered: 15 July 2014Reply With Quote
One of Us
posted Hide Post
Live Oak,

I assume from your post you have decided to keep the rifle? If so, I think that's a good choice.

If you still have an interest in selling, send me a PM.
 
Posts: 9954 | Location: Houston, Texas | Registered: 26 December 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Big Bores    I think I will just keep it

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia