THE ACCURATERELOADING.COM CARTRIDGE COLLECTING FORUM

Go
New
Find
Notify
Tools
Reply
  
Re: Suggestions for displaying cartridges
 Login/Join
 
One of Us
Picture of muzza
posted
Kids and animals , the bane of cartridge collections ....

My goodies are stored in old cotton-reel cabinets, the drawers are about an inch and a half deep , and lined with corrigated cardboard to stop the little sods rolling too much .

The "domino" effect is the thing that scares me with vertical storage.
 
Posts: 4454 | Location: Eltham , New Zealand | Registered: 13 May 2002Reply With Quote
one of us
posted Hide Post
I have made several wall mount cabbinets looking like a painting with a glass door. The back of the cabinet is first drilled with several rows of small holes, about 5mm in diameter and about 20-25mm in between, and then a soft fabric is glued on to that. Then i tread a rubber cord though the holes, not to tight and not too sloppy, so i get a "loop" to hold the case... Now I easily can open the glass door (magnetic lock) and remove a cartridge to look at the headstamp and there is no problem with the cat an so on. Think it probably could be done nicer but its home made and thats a big satisfaction.



Hard to describe but if some one will help me post a pic I can email one. Send me an mail: tomas.morn "at" home.se
 
Posts: 240 | Location: Finland | Registered: 16 July 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia