THE ACCURATERELOADING.COM BULLETMAKING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Bullet Making    Finally Got Our New CNC Lathe Up And Running -Photos Added
Page 1 2 

Moderators: Canuck
Go
New
Find
Notify
Tools
Reply
  
Finally Got Our New CNC Lathe Up And Running -Photos Added
 Login/Join
 
Administrator
posted
We finally got our brand new EMCOTURN E25 up and running.

And what a great machine it is too.

Much quieter than our 20 year old machine, and much more consistent too.

Our old machine used the SIEMENS system, and this one uses the FANUC system.

We had to redesign all our bullets, and all set for production.

I am making a short run of each now, and will post photos later on.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Saeed:
We finally got our brand new EMCOTURN E25 up and running.

And what a great machine it is too.

Much quieter than our 20 year old machine, and much more consistent too.

Our old machine used the SIEMENS system, and this one uses the FANUC system.

We had to redesign all our bullets, and all set for production.

I am making a short run of each now, and will post photos later on.


Very nice

Maybe now you can make some blaser quality gun parts Big Grin

Mike
 
Posts: 13145 | Location: Cocoa Beach, Florida | Registered: 22 July 2010Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
Saeed
How about making some hybrid brass 13 degree to 67% conical nose bullets with a hydro bowl nose? Should be an amazing performer in damage and depth of penetration.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27589 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
Saeed, I am really happy for you. You are so blessed to be able to pursue this passion to the extent that you can. Thanks for sharing the fruits of what comes out of your shop, your range and your field experience.


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16303 | Location: Sweetwater, TX | Registered: 03 June 2000Reply With Quote
One of Us
posted Hide Post
Saaed:

Congratulations on the upgrade. Our school teaches Fanuc programming to our secondary students. It is amazing what they will do!
 
Posts: 2638 | Location: Utah | Registered: 23 February 2011Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by boom stick:
Saeed
How about making some hybrid brass 13 degree to 67% conical nose bullets with a hydro bowl nose? Should be an amazing performer in damage and depth of penetration.


Frankly, I see no use to some of the claims being made for bullets, and their performance.

We have quite an extensive experience with the original Barnes X, and they performed great.

I designed our to duplicate their performance, and that is what happened with our Walterhog bullets.

Extremely accurate, and extremely deadly.

What can one ask from a bullet??

I can control the depth of penetration by altering the size of the hollow point, and its depth.

I can shoot a buffalo running away in the rear end, and find the bullet in the neck.

This year we were hunting buffalo.

We followed a herd all morning, and caught up with them.

Shot the first one in the classic broadside shot, and he ran off.

We left him and ran after the rest trying to shoot one or two more.

Shot another one, and the third was disappearing into the forest, with only his backside showing.

A Walterhog in his rear end dropped him in his tracks.

Within a few minutes we had three buffalo bulls down.

This can only happen if one has total confidence in both his rifle and ammo.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
Administrator
posted Hide Post
Here is our machine.

Sample bullets I just ran in it.

264, 140 grains run.

I separate them by weight as you can see.











www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
posted Hide Post
Looks great

What type of coating do you use, spray on moly?

If you can, please share your bullet coating procedure.

I have been using tungsten disulfide in a tumbler,
a lot less messy than spray on moly, works great.

Thank you
 
Posts: 1051 | Registered: 02 November 2003Reply With Quote
Administrator
posted Hide Post
I am using a commercial dry molly spray.

Works great.

Our procedure is to degrease the bullets by putting them in Acetone.

Dry them and spray them

I use large plastic chopping boards I drill suitable size holes in on our milling machine.

I will post pictures.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
Picture of Slider
posted Hide Post
VERY NICE!!!
 
Posts: 2316 | Location: East Wenatchee | Registered: 18 August 2008Reply With Quote
One of Us
posted Hide Post
Saeed, did you happen to take any video while turning the bullets ?
 
Posts: 1007 | Registered: 21 December 2008Reply With Quote
One of Us
posted Hide Post
Beautiful work!

Wish I had access to a CNC.

Thanks for showing us your new toy
and the results.

George


"Gun Control is NOT about Guns'
"It's about Control!!"
Join the NRA today!"

LM: NRA, DAV,

George L. Dwight
 
Posts: 5935 | Location: Pueblo, CO | Registered: 31 January 2006Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by zrp:
Saeed, did you happen to take any video while turning the bullets ?


We did.

But you are not going to see much because of the lubricant spray behind the glass.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
posted Hide Post
Sadly lacking a .458-caliber Walterhog.
450-grain weight would be cool.


tu2
Rip ...
 
Posts: 28032 | Location: KY | Registered: 09 December 2001Reply With Quote
One of Us
posted Hide Post
Saeed

Walterhog bullets.

Can you give them in Dubai to me or are they considered ammo? Would be cool to try them in my 375 ruger.

Mike
 
Posts: 13145 | Location: Cocoa Beach, Florida | Registered: 22 July 2010Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by Beretta682E:
Saeed

Walterhog bullets.

Can you give them in Dubai to me or are they considered ammo? Would be cool to try them in my 375 ruger.

Mike


They don't work in Blasers rotflmo


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
Administrator
posted Hide Post








Video


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
Administrator
posted Hide Post
These are 44 Magnum bullets


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
Administrator
posted Hide Post
Got asked how long we have been making our own bullets.

We have been casting bullets for at least 40 years.

That was long after we discovered when we were kids - and ran out of air gun pellets - that we can make our own.

We opened up shotgun shells - normally #3 or 4, and put two pellets in chewing gum, and loaded the air rifles.

Shots as effective as pellets!

We also made bullets on a Corbin Hydrolic press for sometime.

Trouble with these was that one has to have a set of dies for each caliber, and weight.

Then we decided to get a BOXFORD table top lathe.

We made some bullets on it, but, it was so inaccurate that it is not possible to get bullets exactly the same!

We then decide, about 20 years ago, to go the professional way.

We got an EMCO 325 CNC lathe, and that has worked for us for 20 years.

Then it started breaking down, and parts - electronic controllers - were very hard to find.

And when you find one, very hard to set up correctly.

We decided to retire that machine, and got an EMCOTURN E25.

This is a much more accurate lathe, and I can turn literally hundreds of bullets without any minor adjustments, which I had to do to keep to our very close tolerance with the old machine.

With a CNC lathe, we can make any caliber, any bullet weight.

All we need change is the chuck and the diameter of the copper or brass rod.

Another advantage with a CNC lathe is that I can make different size bullets without too much hassle.

I have some friends who shoot 303 British rifles.

Bullet diameter for these is 0.311.

I do not have to design a new bullet for these, as all I need do is alter the tool offset for our 0.308 bullets, and get these made.

Same goes for 0.264, 0.277, 0.284 etc.

All is needed is adjusting the tool offset, and get any of these.
1


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
posted Hide Post
Expensive bullets. Who cares if your having fun.

Dave
 
Posts: 2086 | Location: Seattle Washington, USA | Registered: 19 January 2004Reply With Quote
One of Us
posted Hide Post
I had a Corbin too. The CSP-1. I made .455 Webley Mk II, Mk III, Mk IV and, yes, .455 Mk VI. I also had a set of their dies to make .380 Mk II bullets. I sold it all long ago but, my, it made very very good bullets.
 
Posts: 6813 | Location: United Kingdom | Registered: 18 November 2007Reply With Quote
one of us
Picture of Jiri
posted Hide Post
Hi Saeed:

Awesome bullets. It is great you can make them by yourself.

I would like to ask you, what is the main purpose of the shape of revolver bullets?

Jiri
 
Posts: 2067 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
Administrator
posted Hide Post
We use the 44 caliber bullets in semi auto pistols - Desert Eagles - and found this design feeds better.

And for simplicity we made the 357 the same.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
Picture of Jiri
posted Hide Post
Thank you Saeed. Now I understand the shape.

It is really great you can make your bullets in house.

Jiri
 
Posts: 2067 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
Administrator
posted Hide Post



A few years ago, we bought some copper rods, and some were not so good.

These were kept at the workshop to be used for other purposes than bullets.

Well, I decided to make some 338 caliber bullets, and thought of trying to use these rod.

Most of them were very good and have no problems, others have these faults as you can see.

The one on the right has a minute crack visible.

I can detect these even without seeing any visible signs, as I weigh each bullet made, and any variation of over a 1/2 grain is suspect.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
Picture of Jiri
posted Hide Post
Interesting. Never seen copper rods with such cracks.

Did you ever try making bullets from brass? (as Lehigh Defense, Cutting Edge etc. do)?

Jiri
 
Posts: 2067 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
Administrator
posted Hide Post
Yes, have made many bullets out of brass.

In fact, we buy our stock half copper and half brass.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
Saeed, can you scale up a high BC bullet to 12 gauge? I am curious about a 12 Gauge From Hell as a supersonic cartridge and obviously subsonic as well.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27589 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by boom stick:
Saeed, can you scale up a high BC bullet to 12 gauge? I am curious about a 12 Gauge From Hell as a supersonic cartridge and obviously subsonic as well.


We can make any diameter, and shape, bullet as long as it does not exceed 1 inch in diameter.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
Well how about a .729” javelin?
Something like this?
Give them to Rob or RIP to test for around 20k FPE! A super legal and lethal 12 gauge!



577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27589 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
Administrator
posted Hide Post
quote:
Originally posted by boom stick:
Well how about a .729” javelin?
Something like this?
Give them to Rob or RIP to test for around 20k FPE! A super legal and lethal 12 gauge!



Wrong shape for a hunting bullet.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
These are the MTH (Match, Tactical, Hunting). There is a hollow point that expands down to low velocities to high velocity.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27589 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
Administrator
posted Hide Post
I think that HP is too small for comfort.

For reliable expansion, we had to make the HP 2.5mm in diameter.

Also, I think these might not fit in some magazines.

Ours are slightly flat nose, and I seat them out all the way to just fit in the magazine.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
I think most of these are single loaded but the 12 Gauge idea is obviously a breech loading option.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27589 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
Administrator
posted Hide Post


This is a problem that crops up when the rod is not straight, and the bullet being made is close to the diameter of the rod.

These are 308 caliber bullets, being made from 8mm rod.

What I found is that certain sizes come slightly over size, and others come slightly under size.


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
Picture of Jiri
posted Hide Post
But you can shoot it too and check if there is any accuracy issue or not ;-)

Jiri
 
Posts: 2067 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
One of Us
Picture of boom stick
posted Hide Post
You have a great opportunity to prank the likes of Walter and friends with making bullets that are wildly inaccurate... just load bullets where the defects or subterfuge is below the crimp.


577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)
 
Posts: 27589 | Location: Where tech companies are trying to control you and brainwash you. | Registered: 29 April 2005Reply With Quote
Administrator
posted Hide Post
Guess what!


www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
Administrator
posted Hide Post




www.accuratereloading.com
Instagram : ganyana2000
 
Posts: 66751 | Location: Dubai, UAE | Registered: 08 January 1998Reply With Quote
one of us
Picture of Jiri
posted Hide Post
Fire and forget self homing bullets. Wow :-)
Now you have to put "cleaning" on few too ;-)

Really nice work Saeed.

Jiri
 
Posts: 2067 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata Page 1 2  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Bullet Making    Finally Got Our New CNC Lathe Up And Running -Photos Added

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia