THE ACCURATERELOADING.COM SPORTERIZED MILITARY RIFLE FORUM


Moderators: jeffeosso
Go
New
Find
Notify
Tools
Reply
  
old army rifle reborn
 Login/Join
 
new member
posted
Hello eveyone,
Recently completed my long distance target Mauser.
1941 Turk action
Trued, lapped, faced and deep blued
Farrell base and rings
Kreiger barrel
6.5 X 55
Hope the photos work

 
Posts: 9 | Location: Northern Calif. | Registered: 05 March 2015Reply With Quote
one of us
Picture of fla3006
posted Hide Post
tu2 How does it shoot?


NRA Life Member, Band of Bubbas Charter Member, PGCA, DRSS.
Shoot & hunt with vintage classics.
 
Posts: 9487 | Location: Texas Hill Country | Registered: 11 January 2002Reply With Quote
One of Us
posted Hide Post
Tell me about trued, lapped, and faced.
 
Posts: 8959 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
new member
posted Hide Post
Receiver faced off square, both inner and outer.
Raceway lapped
Bolt face lapped square
Bolt lugs lapped in for excellent contact
Receiver threads cleaned up
New barrel threads lapped to receiver
Barrel, receiver and bolt alignment measured 10" behind rear of receiver <.oo3"

Stock and metal are fully bedded to 2.5" of barrel
INCLUDING the magazine box.

Accuracy is less than .5moa at 100 yards
Pictured is 25 shots with 5 DIFFERENT loads at one target 100 yards. 142gr SMK and rel22
 
Posts: 9 | Location: Northern Calif. | Registered: 05 March 2015Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
Great project in a great caliber! What trigger did you use?

beer


There is hope, even when your brain tells you there isn’t.
– John Green, author
 
Posts: 16334 | Location: Sweetwater, TX | Registered: 03 June 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by jeffe1951:
Receiver faced off square, both inner and outer.
Raceway lapped
Bolt face lapped square
Bolt lugs lapped in for excellent contact
Receiver threads cleaned up
New barrel threads lapped to receiver
Barrel, receiver and bolt alignment measured 10" behind rear of receiver <.oo3"

Stock and metal are fully bedded to 2.5" of barrel
INCLUDING the magazine box.

Accuracy is less than .5moa at 100 yards
Pictured is 25 shots with 5 DIFFERENT loads at one target 100 yards. 142gr SMK and rel22



Well, OK!
 
Posts: 8959 | Location: Poetry, Texas | Registered: 28 November 2004Reply With Quote
new member
posted Hide Post
Jard trigger, 14 oz. Actually comes out about
1 lb. I love it. The trigger shape is also to my liking.

It also has the Tubbs lightweight firing pin and spring.
 
Posts: 9 | Location: Northern Calif. | Registered: 05 March 2015Reply With Quote
One of Us
posted Hide Post
that could work at my house...

Rich
 
Posts: 23062 | Location: SW Idaho | Registered: 19 December 2005Reply With Quote
One of Us
posted Hide Post
Nice shooting.... And it's a Turk!


Shoot Safe,
Mike

NRA Endowment Member
www.Marionroad.com
www.mausercentral.net
 
Posts: 936 | Location: Middle Georgia | Registered: 06 February 2011Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia