THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
9mm reloads?
 Login/Join
 
one of us
Picture of hivelosity
posted
just got a 9mm S&W mp shot some Federal 115gr factory loads this morning.
What is your favorite loads factory or reloads.
I have a box of Sierra 125gr FNJ going to try 4 grains of bullseye WSR primers.
Any thoughts Welcome, The 9mm is new to me.
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
One of Us
posted Hide Post
My standard load is 5 grains of Unique with 124 grain Hornady XTP bullets and CCI primers.

That load works very well with my M&P Shield, Sig-P239, Sig-P6 (a decades old West German Border patrol version of the P-225) and Sig M11-A1 (a fancy P-229).
 
Posts: 939 | Location: Grants Pass, OR | Registered: 24 September 2012Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
Thanks BL
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by B L O'Connor:
My standard load is 5 grains of Unique with 124 grain Hornady XTP bullets and CCI primers


Same load I have used for years tu2
easy to double charge a case, be careful dancing tu2
 
Posts: 2349 | Location: KENAI, ALASKA | Registered: 10 November 2001Reply With Quote
One of Us
posted Hide Post
Two major loads for 9x19 for me.

First is my usual pistol competition load - 147 grain bullet (coated lead tc) and 3.3 grains of titegroup.

115 grain JHP of choice and a max load of AA#7.

Depends on what it’s for as to the choice of load (my actual AA7 load is over their max, but the 3 guns I use it in shoot it much better than the official max load.)
 
Posts: 10479 | Location: Minnesota USA | Registered: 15 June 2007Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
Thanks .. Bullets are hard to find around this area, I have a 1000 ordered from Extreme just have not got them.
I think I might get a mold 6 cav lee. 124gr and cast my bullets thinking about 12 BHN..
any load info for that combination would be helpful.
ill Try the Unique as well. Ill chase down some load data

Thanks Dave
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
One of Us
posted Hide Post
I reload 115 grain bullets over Unique powder, in my 9MMs.


NRA Patron member
 
Posts: 2628 | Location: Minnesota | Registered: 08 December 2006Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
Thanks
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia