THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Lee Thread Pitch
 Login/Join
 
One of Us
posted
Does anyone know the thread pitch of the decapper stem for Lee Dies? Looks to be a fine pipe thread?

Lee Decapper holder
 
Posts: 188 | Location: Austin, TX | Registered: 12 July 2008Reply With Quote
One of Us
posted Hide Post
quote:
thread pitch of the decapper stem for Lee Dies

It's best to go to the source:
https://leeprecision.com/contact-us.html

http://leeprecision.net/suppor...x/13/product-support


One shot , one kill
 
Posts: 197 | Location: North Carolina | Registered: 13 December 2002Reply With Quote
new member
posted Hide Post
The Lee die body threads use a pitch of 14 so they move .071" with one revolution.
 
Posts: 10 | Location: Phoenix AZ | Registered: 01 July 2011Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Everyone uses the same die body threads but that is not what the OP wants.
Lee decapping pin nuts are standard 1/8th Pipe threads. They are pipe threads, tapered, so the slotted nut can tighten up on the decapping rod. For those who are not familiar with Lee Dies.
 
Posts: 17045 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
Of course, that's the right answer, but where's the fun in that?

Heard back, they're ⅛-27 NPT.

quote:
Originally posted by Snyper:
quote:
thread pitch of the decapper stem for Lee Dies

It's best to go to the source:
https://leeprecision.com/contact-us.html

http://leeprecision.net/suppor...x/13/product-support
 
Posts: 188 | Location: Austin, TX | Registered: 12 July 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia