THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Minimun Barrel Lenght / 257AI / 7x57 AI
 Login/Join
 
<Canadian Connection>
posted
Happy Easter:The Snow is falling and the ground is almost covered again. Minimum barrel length but long enough to efficiently burn a case capacity efficient load built for accuracy and heavier bullets for deer hunting.
My 2 caliber choices for this project are 257 AI & 7x57 AI. Bearing in mind I am a Left Handed shooter who already have the Following � 22-250 Ruger # 1; LH Sako 264 Win Mg 27 ��; LH Rem 788 7mm R Br built for sub-sonic; 7 STW Ruger #1 26�; LH 300 WBY 26�; LH Rem 8mm R Mg 24�; LH Sako 375 H&H 26�. It is time to build a lighter shorter practicable rifle as I can foresee the day that where I will appreciate carrying a lighter rifle with less recoil. I have dies for both 257 AI & 7x57 AI but am leaning towards the 257 AI. Loaded with 100 � 120 g bullets & I would assume this case will prefer slower powders to utilize case capacity what is the shortest barrel length that will efficiently burn this combination, 18�, 20� or 22�. If the 7x57 AI where to be used a 150g bullet would be my choice.
 
Reply With Quote
<Don G>
posted
257 Roberts Improved(??)/ 115 gr. Nosler Part./ 55 gr Reloder-25

18in/2765fps 20in/2861fps 22in/2944fps 24in/3018fps

7x57 AI /150 gr. Nosler Part. / 52.7 gr. H4350

18in/2694fps 20in./2774fps 22in/2844fps 24in/2905fps

Just for comparison. The powders were chosen to be among the best for the 24 inch barrel in each case.

Don

 
Reply With Quote
one of us
Picture of R-WEST
posted Hide Post
Sorry about the snow (unless you like it, of course). When does spring officially arrive there, anyway? Do you have summer?
I have a .257AI and, until recently, a 7x57AI, both with 22" barrels, and my chrony data is about exactly as Don shows it to be. I've also had good luck with H4831SC in the 257AI (at about 3 or 4 grains less than R25). The 7x57I definitely preferred H4350.
The 24" barrel obviously makes a difference; whether you want to lug it around or not is another thing.
Don - Did you actually chronograph this data, or, do you have a program that calculates it?
Good luck,
R-WEST
 
Posts: 1483 | Location: Windber, PA | Registered: 24 January 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia