THE ACCURATERELOADING.COM CAST BULLET FORUM


Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Saeco Bottom Pour Furnace Help!!!
 Login/Join
 
one of us
posted
I purchased an old Saeco furnace. It works great, but I'm a ladle pour guy. I would like to remove the bottom pour mechanism to make cleaning the pot easier.

Any great ideas on how to remove the parts and to reseal the hole.

Thanks

Mike
 
Posts: 148 | Registered: 11 January 2003Reply With Quote
one of us
posted Hide Post
I use an old SAECO that I have had for years. Good pot. I saw, some years ago, that the Lyman--which was very similar--could be plugged by simply screwing in an approprately sized screw into the bottom of the hole.

The SAECO and the Lyman were the same, except the SAECO had higher quality makin's.
 
Posts: 305 | Location: Indian Territory | Registered: 21 April 2003Reply With Quote
one of us
posted Hide Post
I use an old SAECO that I have had for years. Good pot. I saw, some years ago, that the Lyman--which was very similar--could be plugged by simply screwing in an approprately sized screw into the bottom of the hole.

The SAECO and the Lyman were the same, except the SAECO had higher quality parts.
 
Posts: 305 | Location: Indian Territory | Registered: 21 April 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia