21 January 2003, 10:58
Jerry/AKLooking for a load for 158 gr. hard cast in .35-.284, .350 RM, and .35 Whelen
Just a very mild load please. Say one reaching 1400-1500 fps (to hopefully avoid leading). Anyone have a suggestion?
Jerry/AK
23 January 2003, 18:00
woody1Jerry, try 8-12 grains of Unique or a grain or 2 less Red Dot or similar amounts of anything in between. 10-12 grains Unique should be around 12-1450 fps give or take. Regards, Woody
24 January 2003, 09:17
LeftoverdjWhen I don't know what I'm doing (no rude comments, please), I dump in 13.0 grains of Red Dot. Given a reasonable bullet weight and a normal size case, it's safe, and it works.
Credit to C. E. Harris on this one.
24 January 2003, 17:31
woody1FWIW 13 grains of Red Dot is a little hot for the speed we were looking for here. Would be prob'ly around 1700 fps. Regards, Woody
24 January 2003, 22:14
jpbSpeaking of "The Load" of CE Harris, I happen to use 13 gr of Red Dot in my .375 H&H with a 255gr cast bullet. Of course, with the large case, the same load will produce a lower velocity compared to a small case like the 35 Whelen.
Anyway, for anybody interested, out of a 25 inch barrel, my loads average 1305fps.
I've use the same 13gr load of Red dot in calibres including the .270 Win, 30-06, 7mm Rem Mag, 358 Norma Mag, .375 H&H Mag and a bunch of others and it always has been easy to shoot and accurrate.
jpb
[ 01-24-2003, 13:22: Message edited by: jpb ]25 January 2003, 06:04
Jerry/AKThanks to each of you.
Since I have Unique but don't have Red Dot, I think I'll try it at 12 grains.
Paul, thanks but a lunch hour just isn't enough time to both eat (mandatory to my biology) and enjoy a range session.
Some other time though...
Jerry/AK