The Accurate Reloading Forums
210 gr 30 cal HBC design-- want one?

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/1811043/m/22010348

28 October 2002, 03:28
aladin
210 gr 30 cal HBC design-- want one?
Forget this-- Lee blocks are limited to 1.1" or so. NOt long enough........

[ 10-28-2002, 00:54: Message edited by: aladin ]
29 October 2002, 05:52
Paul H
Aladin,

My understanding from the Shooters post is, 6 cavity molds are limited to 1.1", but the single cavities can be made as long as needed.
29 October 2002, 13:01
aladin
quote:
Originally posted by Paul H:
Aladin,

My understanding from the Shooters post is, 6 cavity molds are limited to 1.1", but the single cavities can be made as long as needed.

Paul I'm going to re-investigate this. Got this word from a shooters guy who mighta had the stats wrong...
29 October 2002, 13:09
McD
This is from lee's site
Maximum bullet mold dimensions for standard mold blocks; (all dimensions in inches) single cavity, .580 dia. 1.250 length; double cavity, .685* dia. .900 length; six cavity, .520 dia. 1.000 length; *for single cavity mold in double cavity blocks, like our slug mold. For two cavities in the double cavity blocks, max. diameter is .600; Maximum length can be increased on the single cavity mold block for an additional charge of $50